Using aftermarket tach on '86 Ford 6.9 diesel

#1

Can anyone tell me the pros/cons of using most any electronic
aftermarket tach with the stock 6.9 sensor as the sending unit ? Is
there an issue with reading accurate RPM on anything OTHER than the
stock tach ? Thanks in advance to anyone who may have done this and
problems or not they ran into.

#2

it will not work. you have to use a ford tach with the ford sending unit,
cause they are not compatable with aftermarket tach heads.
<owen28147 (AT) gmail (DOT) com> wrote

Quote:

Can anyone tell me the pros/cons of using most any electronic
aftermarket tach with the stock 6.9 sensor as the sending unit ? Is
there an issue with reading accurate RPM on anything OTHER than the
stock tach ? Thanks in advance to anyone who may have done this and
problems or not they ran into.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Using aftermarket tach on '86 Ford 6.9 diesel

4x4 Cars Discussions about 4x4 cars. The on and off-road four wheel drive vehicle. (rec.autos.4x4)

Using aftermarket tach on '86 Ford 6.9 diesel - 04-30-2007 , 09:03 AM

Re: Using aftermarket tach on '86 Ford 6.9 diesel - 04-30-2007 , 04:46 PM