My son removed a defective drivers side fuel tank a while ago.
I am trying to put a new one back in.

Question I have is the tank on the drivers side has a ground wire, and a
wire that connects to the sending unit.
Those two I can figure out.

There are two additional wires hanging there that go where?
Both are an Orange or Red color, and one has a white tracer.

My son does not remember the wires, and he is across country now.

I believe there is just the two wires needed for the tank sending unit, but
am not sure about the other two wires.

Anyone???

Anybody?
AllData is useless.

"Bill" <bargerw (AT) bellsouth (DOT) net> wrote

On Sun, 18 May 2008 12:20:54 -0400, Bill wrote:

You know I have been in the same position exactly. Installed a new tank
on the passenger side where one had been removed and the wires cut by a
previous owner.
The box is still off and the wires now are covered with split-loam so I
can't figure it out for you. I figured it out before but it took loots
of trial and error and plenty of work with a volt meter to get it right.

Anyone with the box back on has no chance to help you unless they have a
photgaphic memory. You can always try a gas tank shop.

If you want to post the vin,

I have my older MOD, and the wiring in that includes the dual tanks.

Let me know.

RK
"Gordie" <gordy (AT) nolalu (DOT) on.ca> wrote

VIN 1GCEC14HXE1145499


"Refinish King" <Diagnosticman (AT) verizon (DOT) net> wrote

Hi Bill:

Thank you for the reply, I'll look the diagram up and e-mail it to you later
today.

Thank you,

RK
"Bill" <bargerw (AT) bellsouth (DOT) net> wrote