'93 k1500 pitman arm placement

#1

any tips on replacing the pitman arm on a 1993 k1500 extended cab? does
the nut that holds the arm on require a special wrench? what size? is it
necessary to pull the steering box to get to the pitman arm?

#2

On Tue, 02 Aug 2005 23:17:09 -0400, "birdogzz" <birdogzz (AT) comcast (DOT) net>
wrote:

Quote:

:|any tips on replacing the pitman arm on a 1993 k1500 extended cab? does
:|the nut that holds the arm on require a special wrench? what size? is it
:|necessary to pull the steering box to get to the pitman arm?

DO NOT use a pickle fork to remove the pitman arm.. you WILL ruin the
steering box. you don't have to remove the steering box, but it makes
it much much easier. on my 88.. it's just a hex nut,don't remember
the size.

HTH,
Bret

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

'93 k1500 pitman arm placement

4x4 Chevy/GMC Trucks 4x4 Chevy/GMC Trucks Discussions (alt.autos.4x4.chevy-trucks)

'93 k1500 pitman arm placement - 08-02-2005 , 11:17 PM

Re: '93 k1500 pitman arm placement - 08-03-2005 , 07:29 PM