| | Rating Thread /
Thread Starter | Last Post  | Replies | Views |
 |  | just wondering if there was anybody out there that has a equinox and has
had any problems with there's yet.
i have had mine for 1 year now and have...
EARNHARDT3 Last
|
10-04-2007 04:10 PM
Topp@Work  | 16 | 17 |
 | | I was on the highway and my Service 4WD message center screen came on. After
this, I switched (push button type transfer) it in to 4x4 and it seemed...
AnotherAnonymous
|
10-04-2007 12:51 AM
AnotherAnonymous | 0 | 5 |
| | | How much would it cost to switch from auto to standard? Would it be worth
it or are there some things that highly maximize the automatic?...
saucytony
|
10-04-2007 12:35 AM
Augustus | 1 | 8 |
| | | Does anyone know where I should line up the timing mark on the driv
pulley with which notch on the timing plate, for first cylinder firing?
Had to...
Mr. B
|
10-03-2007 10:21 PM
saucytony | 2 | 5 |
| | | On Sun, 30 Sep 2007 15:17:41 -0700, Frank Gilliland
<wīrenut@NOSPAMīcehouse.net> wrote:
Yes the pump line is supposed to be 14 PSI give or take...
kellynapril@hotmail.com
|
10-03-2007 10:19 PM
ghost | 12 | 13 |
| | | I have an 02 sunfire that I bent the sub-frame on. The passenger side is
like 1/8" to a 1/4" out. Does anybody have an idea of what this will cost
to...
saucytony
|
10-03-2007 07:59 PM
Shep | 1 | 9 |
| | | I have a 2003 Trailblazer and the A/C will not blow from the top
vents. It will only blow from the bottom vents and the defrost vent.
Does anyone...
Clamor
|
10-03-2007 04:42 PM
Bill Wragg | 1 | 9 |
| | | I can't seem to figure out how do a self-diagosis on my GMC K1500. I read
that the ground wire should be in A but i also read somewhere else that...
saucytony
|
10-03-2007 02:58 PM
saucytony | 0 | 4 |
| | | My chevy 92 360 straight stick, was having problems, I dropped it by a
shop and they tell me the motor had about a handful of sand and the
tranny had...
flex55
|
10-02-2007 10:30 PM
The Nolalu Barn Owl | 2 | 10 |
| | | I've put together a little website with pictures of 23 of the weirdest
cars and trucks I've ever seen. It's www.odd-cars.com Enjoy!
- Jeff
javawizard
|
10-02-2007 11:37 AM
javawizard | 0 | 5 |
| | | My '89 K1500 has the stock 350 in it, and when i basically floor it
from a stop the engine skips, but instead of skipping and high-reving
it skips...
acdcruledthewrld@yahoo.com
|
10-01-2007 09:34 PM
acdcruledthewrld@yahoo.com | 0 | 7 |
| | | "Frank Gilliland" <wīrenut@NOSPAMīcehouse.net> wrote
Spam me
|
09-30-2007 11:45 PM
David & Robin Johnson | 14 | 15 |
| | | My trucks speed and tachometer come and go.I have replaced the instrument
cluster but this did not help.sometimes i start the truck and it works...
roger71
|
09-30-2007 08:01 AM
07_GMC | 3 | 8 |
| | | I have a 1972 chevy 1/2 ton pickup w/ a stock 350 engine and I need to
know the timing and the dwell.Thank you.
redtractor@clearwire.net
|
09-30-2007 12:24 AM
SnoMan | 3 | 7 |
| | | Seems like there are some aftermarket shocks out there with some
pretty substantial performance claims.
Anybody found it worthwhile to pay the extra...
(PeteCresswell)
|
09-29-2007 09:19 AM
Mark D | 1 | 3 |
| | | On Sep 24, 6:45 pm, Frank Gilliland <wīrenut@NOSPAMīcehouse.net>
wrote:
How about some one that tells a poster to trade in a perfectly good
truck...
Pickuptruckbeauty@gmail.com
|
09-28-2007 08:10 AM
Comboverfish | 37 | 38 |
| | | I own a 98 S-10 4 Door Blazer with a push button 4 wheel drive system with
no automatic 4 wheel drive button.During the 4 years that I owned...
cldush
|
09-26-2007 11:19 AM
cldush | 0 | 11 |
| | | Here's a silly question that hopefully someone can answer...
Does a 95 Jimmy 4x4 come with OEM anchor points to be used with a LATCH
system-based...
AWN
|
09-26-2007 09:53 AM
AWN | 2 | 5 |
| | | Does anyone have instructions on lubing the intermediate steering shaft on
GM trucks 99-06? I recall reading that there is a lubing kit...
G
|
09-25-2007 06:32 PM
Troy Sigwing | 1 | 8 |
| | | Hi all
I have a 1988 R20 suburban which is converted to run on lpg.
I have downloaded a copy of win aldl.
my problem is that the check engine light...
xxxxxl
|
09-25-2007 12:42 AM | 21 | 22 |
| | | I own a 1991 Chevy Blazer T10 4x4 2 door .I had to used 4 wheel low drive
this spring when I tried to go to 2 wheel drive the light when on to...
Richard Brandstetter
|
09-24-2007 01:46 AM
Richard Brandstetter | 2 | 5 |
| | | "Meat Plow" <meat (AT) petitmorte (DOT) net> wrote
Big Duke
|
09-22-2007 12:16 PM
PhilO | 4 | 13 |
| | | Trying to replace lower ball joints on 1998 Astro Van hae bought the tool to
press them out as well as tryed a sledge hammer still not budging anyone...
MWM65
|
09-21-2007 01:59 AM
Marsh Monster | 4 | 7 |
| | | Hey to all...!!! My '94 S10 Blazer's 4wd is not working. I know this is a common
problem, I just don't know the solution. It has the electric engage...
Pretty Man
|
09-21-2007 01:56 AM
Marsh Monster | 4 | 15 |
| | | My '98 'burb - 150k+, never had a wheel bearing replaced - has
started making a rotational-related noise.
Gonna take it to the shop tomorrow, but my...
(PeteCresswell)
|
09-20-2007 09:57 AM
SnoMan | 3 | 6 |
| | | If any of you know what the A-F Porter Brumfield relay 'pack' under the pass
side lower dash (just left of the vac motor for the blower door) is,...
AWN
|
09-19-2007 05:57 PM
AWN | 0 | 7 |
| | | I caught the passenger mirror on another mirror, it knocked the glass
bracket off the yoke and cracked the glass. Is it possible to replace just
the...
a12vman
|
09-19-2007 11:30 AM
a12vman | 0 | 5 |
| | | i have a question. i bought a 08 silverado crew cab. i want to install a
2.5" front leveling kit. what will this do to my front suspension...
Troy Nemes \(FMR\)
|
09-18-2007 11:53 PM
SnoMan | 1 | 5 |
| | | can someone direct me as to where find updated (2007 or 08) GM RPO codes. i
have found a listing of them, but not all my RPO codes are listed, and...
Troy Nemes \(FMR\)
|
09-18-2007 11:29 PM
Brian | 4 | 6 |
| | | 1997 1500 4x4. started truck and service engine light came on. put truck
in 3rd and hesited to drive forward, put in reverse and drove fine. put
in...
garlando4
|
09-18-2007 11:22 PM
Marsh Monster | 3 | 10 |
| | | I am having trouble getting the timing on zero on the crank damper it runs
best retarded what do i have to do to get it timed to zero on...
shiferbrains
|
09-18-2007 09:23 PM
Refinish King | 29 | 30 |
| | | Front end vibration.
Looking for information, If any body has experienced wheel vibration.
My truck seams to continue to bounce more than it should...
jdank4422
|
09-17-2007 10:44 PM
SnoMan | 1 | 9 |
| | | On Sep 15, 12:44?pm, PerfectReign <theperfectre... (AT) yahoo (DOT) com> wrote:
As of right now there are no codes or pending codes. Do you think...
pkup83
|
09-17-2007 09:00 PM
pkup83 | 1 | 11 |
| | | Hi all,
Okay hopefully you guys can point me in the right direction.
My oil level light has come on three times. It has 49K miles and...
stoehrd@gmail.com
|
09-17-2007 08:51 PM
stoehrd@gmail.com | 15 | 16 |
| | | How do you get the rear brake disk/drums off, I relaxed the cables but
they are still catching on the e/brake shoes.
mark
|
09-17-2007 06:58 AM
nonsense | 22 | 23 |
| | | I have a 2000 Silverado 2500 with the ext cab and a short bed. The
stock GVWR is 2395. I'm looking at a couple of the Lance campers that
are...
Deuce
|
09-16-2007 08:56 AM
SnoMan | 5 | 6 |
| | | On Fri, 14 Sep 2007 13:05:15 -0400, "Black Dog"
<mwcallah (AT) usenetserver (DOT) com> wrote:
It is kinda difficult to gage true bearing temp...
SnoMan
|
09-15-2007 06:18 AM
SnoMan | 0 | 5 |
| | | Another thing to check would be the fitting connecting the heater core
lines from the back of the intake manifold and the water pump. These
have...
Mr. B
|
09-14-2007 11:12 PM
Mr. B | 0 | 8 |
| | | 1990 Chevy k1500... I have my instrument cluster out due to some
annoying speedo problem and a bad bulb. Local Chevy dealer tells me they
don't do...
red_bowfire
|
09-14-2007 08:05 PM
JQ | 7 | 16 |
| | | I have inherited an old 2500 4X4. The transfer switch is in the dash
board to change from 2X4 to 4X4. Does anyone know where to find a
replacement...
rekabaduts@gmail.com
|
09-14-2007 04:06 PM
Brian | 2 | 13 |
| | | Hi
Can someone tell me if there is anywhere to connect the cold side of the
brake controller, other than to the stoplight switch?
I would like to...
Charles
|
09-14-2007 11:49 AM
SnoMan | 1 | 14 |
| | | On Fri, 14 Sep 2007 08:32:41 -0700, PerfectReign
<theperfectreign (AT) yahoo (DOT) com> wrote:
And even more fun when it will not go into 4x4 at...
Brian
|
09-14-2007 11:45 AM
SnoMan | 4 | 8 |
| | | 2ndAuto.com is a FREE platform to sell used cars around America.
http://www.2ndAuto.com. FREE Registration, FREE Posting Car Photos,
Everything is...
2ndauto@gmail.com
|
09-12-2007 11:04 PM
2ndauto@gmail.com | 0 | 5 |
| | | Hi there,
I need to replace a failing cam position sensor. I have the 95 W series
vortec motor. Is this sensor removable/replacable if I pull the...
AWN
|
09-12-2007 06:36 PM
AWN | 7 | 8 |
| | | I own a 2002 Chevy Silverado 4x4 Ext. Cab and was wondering why when the 4wd
is engaged it seams as if the the rear end is acting like it has a...
Timbo via CarKB.com
|
09-12-2007 02:14 AM
Big Al | 6 | 7 |
| | | Hi guys...
My rear defogger wire came off where it connects on the window (1998 Chevy
Blazer). Is there an easy way to stick this dohickie back...
A|ice
|
09-11-2007 05:40 PM
A|ice | 2 | 11 |
| | | There is a leer cap for sale locally, model 122 in the right color for
my truck(89 gmc k3500 longbed ex-cab). It's off a 1988 dodge
longbed. The...
89GMC
|
09-11-2007 08:22 AM
89GMC | 5 | 10 |
| | | I want to see what you've done to your truck. Even if you haven't
done anything, I'd still like to see a picture.
Upload your pictures in the...
Tim J
|
09-11-2007 05:36 AM
Marsh Monster | 1 | 10 |
| | | Would anyone know where i can find OBD-11 codes for chevy Tahoe
Thanks Robert :?
westtexasbob81452
|
09-10-2007 01:58 PM
qwerty | 1 | 8 |
| | | I have 1985 chev 1 ton looking for a extra wide front bumper to mount
winch on. I have seen a couple but I don't remember where? Military
maybe,mag?...
green1dude
|
09-09-2007 08:41 PM
azwiley1@gmail.com | 1 | 7 |
