| | Rating Thread /
Thread Starter | Last Post  | Replies | Views |
 |  | to be (and probably the regulator arms too) as it moves up
and down - good point! Thanks again, JELo
-----= Posted via...
JELo
|
07-27-2003 11:43 PM
JELo  | 5 | 20 |
| | | Has anyone ever removed a torsion bar from a Chevy truck? I have to remove
the passenger side bar so I can replace the torsion bar insulator. If...
John Manner
|
07-27-2003 10:02 PM
John Manner | 4 | 17 |
| | | Not for free. Alldata has them for $25/year, I haven't tried them yet but
some others say the quality of their scans isn't great.
"Markus"...
Me
|
07-27-2003 08:52 PM
Markus | 1 | 13 |
| | | Hi all,
1990 Suburban V1500 4x4 woes again...
After getting the EGR situation taken care of, now I have develpoed a sound
in either the...
Don Rupanovic
|
07-27-2003 05:42 PM
Don Rupanovic | 0 | 17 |
| | | "Gary Glaenzer" <nobulltrans (AT) mchsi (DOT) com> wrote
Does the brake light work on that side?
Also the drivers side licence plate light is...
Jeremy Chavers
|
07-27-2003 09:41 AM
joe | 2 | 16 |
| | | Hi,
MOOG parts are top quality.
<thosefishguys (AT) earthlink (DOT) net> wrote
Buck F.
|
07-27-2003 09:02 AM
Rich B | 1 | 10 |
| | | I have a 91 Chevy pickup with a 350. The engine wants to stall when I put it
in gear, and lately it wants to stall when out of gear.
There are no...
mow
|
07-26-2003 11:44 PM
Mastermech | 4 | 13 |
| | | I have 1990 reg cab, bench seat with center armrest. Do to fact that I
may have to ship just the seat cover only, off a wreck, has anybody
have the...
pedro
|
07-26-2003 09:15 PM
pedro | 0 | 13 |
| | | Brian,
I worked for GMC many years. I have never heard of a trans slip on
deceleration. How can a trans slip on deceleration? Not in my book.
A...
GMdude
|
07-26-2003 04:58 PM
GMdude | 0 | 27 |
| | | The strangest thing just happened. I was wiping off the dash in my
2003 Silverado 2500HD and the damn headlight sensor fell thru the
dash. It's just...
Michael
|
07-26-2003 10:30 AM
RHinNC | 1 | 24 |
| | | What are some possible causes for the evaporator to freeze up? 97 z-71
350
--
also every once in a while the heater will come on on its own I cant...
Gary Lawrence
|
07-26-2003 09:19 AM
Im Right | 4 | 12 |
| | | What size tool do I need to remove my caliper 97 gmc z-71 Gary
I left my set in N Georgia
Gary Lawrence
|
07-26-2003 08:23 AM
Bret Chase | 1 | 12 |
| | | Complete Details @ http://www.carsecrets.com/t.cgi/790827
GrantOrg
|
07-25-2003 10:15 PM
GrantOrg | 0 | 11 |
| | | I am told I have a 3:08 ratio diff, how many teeth on the ring gear
and also the pinion gear.
pedro
|
07-25-2003 02:18 PM
Carroll Senn | 1 | 8 |
| | | Hi everyone. I was just curious if anyone has bought/installed the Air Max
Spiral Flow Intake & matching Throttle body spacer package. I have a...
Dave
|
07-25-2003 08:59 AM
Dave | 3 | 11 |
| | | I am wanting to buy a Duramax 2500HD but am worried about it because of my
location. I am in the Chicago area. How are they as far as starting in...
Curtis Bergeron
|
07-25-2003 08:57 AM
R. Makul K1XV | 2 | 9 |
| | | no,no,no, the tank must always be nearly full. At least that's been the
way it's happened to me : )
seriously it's not too bad at all if the tank...
worker
|
07-25-2003 02:17 AM
Big Chris | 4 | 15 |
| | | I have a 2002 4x4 Silverado 1500 (4.8L) and when I drive at the lower end of
the 4th gear (overdrive) around 37 to 40 mph I hear a grinding noise...
Do et Max
|
07-24-2003 10:46 PM
Do et Max | 0 | 10 |
| | | Also, after the new ECM is installed and programmed, you need to perform the
crank position sensor variation learn procedure, which also requires a...
My Name
|
07-24-2003 10:39 PM
Robert Hancock | 3 | 15 |
| | | "David W" <dwrate (AT) interbaun (DOT) c0m> wrote in
news:v3bvb61inac8d1 (AT) corp (DOT) supernews.com:
There May also be some Holding clips on the...
FlashPoint
|
07-24-2003 09:44 PM
FlashPoint | 0 | 9 |
| | | I want to stick an aftermarket sunroof in my Jimmy next weekend. What should
I use to seal the frame to the roof?
SBlackfoot
|
07-24-2003 07:36 PM
SBlackfoot | 3 | 9 |
| | | Bob,
Check the connector connections to the fuel sender and the guage. The connectors GM uses (metripak) have a history of loosening up...
Martin Riddle
|
07-24-2003 06:52 PM
Paul | 1 | 10 |
| | | Pulling the line off of the EGR rectified the situation...
Now it's off to the auto parts store to pick up a new one!!
Thanks Again for the help,...
Don Rupanovic
|
07-24-2003 05:51 PM
Don Rupanovic | 1 | 7 |
| | | I my get a new camper with a GVWR rating of 6,000 lbs. My 02 Silverado 4X4
Ext. Cab has a 4.8 motor and 3.73 rear.
Chevy say's I have GCWR rating of...
David Fritz
|
07-24-2003 02:08 PM
Joshua Phillips | 1 | 12 |
| | | Not you thats for sure, it is quite obvious, I am just making an educated
statement to clear up a post made from someone who knows little about...
Jeff Springer
|
07-24-2003 10:48 AM
PAUL | 5 | 9 |
 | | "(Pete Cresswell)" <x@y.z> wrote
first things I did to my 88 S-10, my 2000 has a guage so I don;t need one
there as bad. This is much better than...
Rich B
|
07-24-2003 01:49 AM
Ken | 18 | 19 |
| | | The OEM seats in my '91 are shot to the point my wife refuses to ride in the
truck (come to think of it, they make my back ache, too). Any advice on...
aulii@pacbell.net
|
07-24-2003 01:22 AM
aulii@pacbell.net | 0 | 11 |
| | | Hi all, I have a 1989 Chevy Conversion van with a 350 throttle body
injection system. Recently it has started to hesitate after I have been
running...
Chris Mares
|
07-24-2003 01:16 AM
Ken | 1 | 23 |
| | | I have a 1993 Silverado K1500 short bed, step side with a 5.7 liter TBI and
automatic transmission. I recently rode to lunch in a co-worker's...
Derek Schwartz
|
07-23-2003 11:46 PM
Mastermech | 1 | 10 |
| | | "Michael" <krzy4girls (AT) aol (DOT) net> wrote
You assume too much. He just asked a question. He didn't say he had a 2003
Silverado OR an owners...
Joshua Phillips
|
07-23-2003 09:39 PM
Dave Brower | 4 | 13 |
| | | Forgive me if I am posting to the wrong group. I "watched" the process the
last time I changed oil and was told there are NO front end lube zerks on...
JamesWilson
|
07-23-2003 07:27 PM
shiden_kai | 2 | 12 |
| | | Greetings,
I picked up a 'rear view mirror upgrade' for my 2003 trailblazer. I
wanted one when I bought my trailblazer, however, I couldn't...
Markus
|
07-23-2003 07:12 PM
Markus | 2 | 17 |
| | | Im looking at a 1995 S-10 with the 4.3. Is this OBD 1 or OBD 2
Thanks
seeray
|
07-23-2003 04:26 PM
Me | 6 | 21 |
| | | Hi everyone I've got a problem I'd like some advice on.
Four days ago I bought a '92 Chevy 3/4ton 4x4 (6.5 turbo diesel,
4L80e Trans, 241c transfer...
Krissi
|
07-23-2003 05:01 AM
Pete | 2 | 15 |
| | | Is there any way to read and or clear codes on a 98 Tahoe without a scan
tool.?. My service engine light came on when I was toying with my...
Rokihora
|
07-23-2003 01:22 AM
Rokihora | 0 | 21 |
| | | Greetings,
I purchased a new Compass/Temp/Dimming rear view mirror and need to
route a power wire from the roof headliner. I was able to remove...
Markus
|
07-22-2003 11:30 PM
Markus | 2 | 17 |
| | | '95 K2500 6.5 TD/4L80E
I am wanting to remove an OEM 48 plate cooler and replace with an OEM 72
plate cooler, but it appears the lines are...
Snowman
|
07-22-2003 08:51 PM
DonW | 1 | 12 |
| | | "Rick" <rick_reineman (AT) hotmail (DOT) com> wrote
Here's a link to the CARB page where you can search for exempted parts. If
it's listed here,...
Sean Conolly
|
07-22-2003 02:35 PM
Sean Conolly | 0 | 17 |
| | | on a 2000 1500 Silverado Z71, should the front drive shaft turn freely
if the vehicle is not in four-wheel-drive? when the vehicle is in 2HI,
it will...
tfend
|
07-22-2003 11:29 AM
98 Camaro | 1 | 19 |
| | | Avoiding Costly Auto Repair is the complete guide to save money with your car!
http://www.avoidingcostlyautorepair.com
ACAR
|
07-21-2003 11:28 PM
ACAR | 0 | 19 |
| | | I've noticed a little extra wear on the front right tire of my 1991 Z71.
Now that I think about it, it /sometimes/ likes to pull a bit to the...
LowDownZ28
|
07-21-2003 10:37 PM
Shades | 1 | 22 |
| | | The pump is not submerged in the fuel but uses the fuel that passes
through the pump to keep cool. If you only have a few gallons in your
tank, the...
Big Chris
|
07-21-2003 10:31 PM
shiden_kai | 4 | 17 |
| | | go for the REVO's. I have them in 265's and want to go to the 285's when I
have to get more. You will love them
"Derek Schwartz" <derekvs (AT)...
Adair Winter
|
07-21-2003 09:13 PM
Another Plane of Existence | 7 | 23 |
| | | well... easy is relative. to remove the cluster, remove all the screws on
the instrument bezel, step on the brake, put it 1st (if an auto), pop...
Bret Chase
|
07-21-2003 08:36 PM
Bret Chase | 0 | 15 |
| | | Per my last note, my 1991 Z71 requires a new steering box (badly). What
model and year boxes will interchange? did they use the same box way...
LowDownZ28
|
07-21-2003 08:04 PM
LowDownZ28 | 0 | 19 |
| | | I have some spots on my cloth headliner and wondering what to use to clean
it? Note that i am unable to sbrub it due to headliner being a cloth...
Larry
|
07-21-2003 08:02 PM
Larry | 0 | 20 |
| | | Yes, Gasket leak.
"Clint Elliott" <clinte (AT) telusnospamplanet (DOT) net> wrote
Martin Riddle
|
07-21-2003 07:49 PM
LowDownZ28 | 1 | 18 |
| | | A few quick questions: (just got 2000 Z71 Siverado)
I noticed a "clunk" around the front of the transfer case at low
speeds... checked the rear...
tfend
|
07-21-2003 07:15 PM
shiden_kai | 1 | 18 |
| | | Panzer240 Spilled my beer when they jumped on the table and
proclaimed in <Xns93BF6AB7C3096fw190a8 (AT) 142 (DOT) 77.1.194>:
<Snip>
Panzer240,...
Thund3rstruck
|
07-21-2003 06:27 PM
Thund3rstruck | 0 | 22 |
| | | All,
I'm trying to understand the difference between oxidation, thermal
breakdown, and flash point.
First, is "oxidation" and "thermal breakdown"...
Wayne Willson
|
07-21-2003 12:05 PM
Wayne Willson | 0 | 21 |
