AutosTalk Forums  

plows again, small trucks doing the job.

4x4 Chevy/GMC Trucks 4x4 Chevy/GMC Trucks Discussions (alt.autos.4x4.chevy-trucks)


Discuss plows again, small trucks doing the job. in the 4x4 Chevy/GMC Trucks forum.



Reply
 
Thread Tools Display Modes
  #1  
Old   
DJ Hatt
 
Posts: n/a

Default plows again, small trucks doing the job. - 10-10-2003 , 02:59 PM






I've spent a lot of money this past spring and summer on my 4x4 88
S-10. Much more than I ever expected I would. I really had no plan,
I haven't owned a 4x4 prior to this one, and just wanted something for
winter, to hunt, fish, get around my buddies farm, and not get stuck,
go the extra mile.

I still have a long way to go. I've started to work on the frame, the
front end, and have small leaks both at the differential and transfer
case, driveline parts that need replaced. I'm running out of money.
The transmission does what its supposed to do, but for what I'm
thinking now, I probably should have a manual transmission too.

My thoughts are making some money back that I've invested in this
truck, with this truck. I could hang 450lbs on the front of it, and
get some plowing this winter. I work construction, so I'll have time
off to do it. Trouble is, I need to know someone with some experience
doing this with one of these trucks. There's only one plow that will
work on it, far as I know. I'm actually a little doubtful I could
push much snow, depending on the weight of it, combined with the
weight of the truck and hardware. Unfortunately, I have the 2.8v6
too. Slap! Newly rebuilt however.

I know I'm going to get a lot of flak from big p/u owners about NOT
doing this unless I want to experience dismal failure and lots of
repair bills and a plow I can't move in the spring. I need to talk to
someone who's actually done this. Lighter snow, or taking smaller
swipes with deeper snow would probably be necessary, then haveing a
place to put it without horsing it around manually. Well, for now,
I'm just thinkin, thinkin, thinkin, talkin and talkin. I know there
is a market, and I went out and priced 4x4 Deere and MF tractors with
loaders and blades. $11,000. - $13,000 or more for something that
would work.

What do you think guys? I don't mind hearing from educated naysayers
and I know there are probably going to be alot of them. yeah, for
now, I am just dreamin. Dreamin myself into a nightmare maybe.

Hatt


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.525 / Virus Database: 322 - Release Date: 10/9/03




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

Reply With Quote
  #2  
Old   
Rich B
 
Posts: n/a

Default Re: plows again, small trucks doing the job. - 10-10-2003 , 07:24 PM






A snowplow really beats the crap out of vehicle. I've never owned one
but I've spoken to lots of guys that have them and the truck wears out
parts much quicker when its pushing a plow. On the other question, I've
plowed snow with two different PU's - both were stick shift and both
performed well.


Reply With Quote
  #3  
Old   
Santa
 
Posts: n/a

Default Re: plows again, small trucks doing the job. - 11-21-2004 , 01:10 PM



Been plowing Snow sincw 1994 with my 89 S-10 4X4 Here in Flint, Mi
And I do 4 Commercial parking lots.. No Breakdowns YET !!!



DJ Hatt wrote:

Quote:
I've spent a lot of money this past spring and summer on my 4x4 88
S-10. Much more than I ever expected I would. I really had no plan,
I haven't owned a 4x4 prior to this one, and just wanted something for
winter, to hunt, fish, get around my buddies farm, and not get stuck,
go the extra mile.

I still have a long way to go. I've started to work on the frame, the
front end, and have small leaks both at the differential and transfer
case, driveline parts that need replaced. I'm running out of money.
The transmission does what its supposed to do, but for what I'm
thinking now, I probably should have a manual transmission too.

My thoughts are making some money back that I've invested in this
truck, with this truck. I could hang 450lbs on the front of it, and
get some plowing this winter. I work construction, so I'll have time
off to do it. Trouble is, I need to know someone with some experience
doing this with one of these trucks. There's only one plow that will
work on it, far as I know. I'm actually a little doubtful I could
push much snow, depending on the weight of it, combined with the
weight of the truck and hardware. Unfortunately, I have the 2.8v6
too. Slap! Newly rebuilt however.

I know I'm going to get a lot of flak from big p/u owners about NOT
doing this unless I want to experience dismal failure and lots of
repair bills and a plow I can't move in the spring. I need to talk to
someone who's actually done this. Lighter snow, or taking smaller
swipes with deeper snow would probably be necessary, then haveing a
place to put it without horsing it around manually. Well, for now,
I'm just thinkin, thinkin, thinkin, talkin and talkin. I know there
is a market, and I went out and priced 4x4 Deere and MF tractors with
loaders and blades. $11,000. - $13,000 or more for something that
would work.

What do you think guys? I don't mind hearing from educated naysayers
and I know there are probably going to be alot of them. yeah, for
now, I am just dreamin. Dreamin myself into a nightmare maybe.

Hatt


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.525 / Virus Database: 322 - Release Date: 10/9/03




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

Reply With Quote
Reply




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Powered by vBulletin
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.