AutosTalk Forums  

Cabriolet - 1995 - 'M' reg.

Audi Audi Automobiles Discussions (alt.autos.audi)


Discuss Cabriolet - 1995 - 'M' reg. in the Audi forum.



Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old   
deeveetemp2@btconnect.com
 
Posts: n/a

Default Cabriolet - 1995 - 'M' reg. - 05-21-2006 , 11:14 AM






I have an electrical problem that doesn't make sense - at least to me
it doesn't !!
The rear foglight won't go out. As soon as the lighting switch goes
into position 1 (side & tail lights) - the rear fog comes on (and the
LED in the switch illuminates too. So - I removed the switch - it is
STILL on. So - I removed the *front* foglamp switch as well - it is
STILL on.
But - with both switches back on the panel, once I turn the engine on,
then not only is the rear foglamp on, but the rear fog switch operates
the front foglights !!
Obviously, there's a fault somewhere, but I can't work out where it
could be. As far as I can ascertain (I don't have a Cabriolet wiring
diagram, only an A4 diagram which *should* be the same) , the +12v wire
from the output of the rear-foglight switch goes direct to the lamp -
no relays or any other connections - so ...... if the light still comes
on when the switch is removed, I assume that the wire must be picking
up +12v from another wire (rear or licence plate feed maybe) somewhere
along the way ?
May be the loom in the boot (trunk) lid, but before I start to
dismantle the rear end of the car, can anyone confirm that there are NO
relays or any other branch connections in the Grey/White wire between
the rear fog switch (pin 6) and the actual bulb in the boot (trunk) lid
??

Many thanks.
D.V.


Reply With Quote
  #2  
Old   
deeveetemp2@btconnect.com
 
Posts: n/a

Default Re: Cabriolet - 1995 - 'M' reg. - 05-22-2006 , 08:16 AM






Sorted !!! It was the b****y stupid wiring loom that does a 90 degree
bend everytime the boot lid opens, and therefore eventually breaks all
the wires. A mere £105.00 + vat to replace !!


Reply With Quote
  #3  
Old   
Steve Sears
 
Posts: n/a

Default Re: Cabriolet - 1995 - 'M' reg. - 05-23-2006 , 08:32 AM



.....or, you could splice in some wire that can take the flexing, or make a
loop so that it isn't subjected to such bending stress. BTDT on all 4 doors
and the trunk on my 1987 5ktq.
Cheers!
Steve Sears
1987 Audi 5kTQ
1980 Audi 5k
1962 and '64 Auto Union DKW Junior deLuxes
(SPAM Blocker NOTE: Remove SHOES to reply)

<deeveetemp2 (AT) btconnect (DOT) com> wrote

Sorted !!! It was the b****y stupid wiring loom that does a 90 degree
bend everytime the boot lid opens, and therefore eventually breaks all
the wires. A mere £105.00 + vat to replace !!



Reply With Quote
Reply




Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.