Only For 9 Button Computer
65 81 1 375 461 Computer Light Bar - for on board computer ( OBC ) 1986
325es $24.95
PROCEDURE - 3 SERIES 84 THRU 91
1. Open glovebox and remove the pins securing the limiting straps to the
glovebox, let the glovebox
open to the floor.
2. Remove the trim cover to the left of the glovebox, which will allow
access to the area behind
the computer.
3. Using a small Phillips head screwdriver, remove the four screws at the
rear of the computer
which hold it in place.
4. On the right side of the computer unit, at the top, is a white plastic
protrusion. This is the light
bar. Pull the light bar out using needle nose pliers.
5. Push in the new light bar and test for proper illumination.
6. Reinstall the computer unit, trim panel and glovebox.
3 series
84 thru 91
You can shop online @
http://www.bavauto.com
" David Meeker" <kd27 (AT) westelcom (DOT) com> wrote
Quote:
The computer that shows the time/temp and other things all of a sudden has
become very hard to read. It appears the data is still there but the
display is very dim. Can it be fixed or does it need to be replaced?
Thanks
David Meeker |