Mondeo Verona, 1800, X Reg Nov2000.

The aircon isn't working. I've read around and see that a quick
bypass of the pressure switch on the low pressure side would allow
a brief power up to see if the system will run.

As I don't actually have the car here to search, can someone point me in the
right direction as to finding this sensor?

If it does power up with the bypass in place, is it worth trying one of these
leak fix cans to refill the system? Do they work, or are they pretty much useless?

Thanks in advance!
Rv!

In message <eTjog.92485$wl.15569 (AT) text (DOT) news.blueyonder.co.uk>, Rv!
<not.a.valid (AT) email (DOT) address.invalid> writes
probably your condenser that is leaking. I've just replaced mine on a
Mk2 Mondeo. It was falling to bits when I got it off.

--
Paul Giverin

British Jet Engine Website http://www.britjet.co.uk

"Rv!" <not.a.valid (AT) email (DOT) address.invalid> wrote




Largely no, but you may have some luck if and only IF there is still some
pressure in the system (but not quite enough to allow the compressor to run)

Tim..