I have a 2000 Sonoma with power windows and power mirrors. The switch(es)
for the mirror seem to be bad as the control for the mirrors is erradic at
best.

Can someone tell how the panel that the switches are mounted on is removed?
It looks like I might able to pry it off. But before I go messing up the
arm rest I'm hoping someone will verify how this thing comes off.

Thanks.

with a small screwdriver or the like, pry up on the front of the
'plate' the switches are mounted in. It will pry up on the front
then slide the 'plate' forward(slightly) and it will come out(with all
wires for all accs. attached-of course). There is a tab in the rear
of the plate that you need to slide forward for it to come out.
Fairly simple you'll see and I'd bet-if your diagnosis is the power
mirror switch-I'd bet your right. See it all the time. good luck
jerry (AT) peru-motors (DOT) com


On Mar 7, 9:00 pm, David Wilkinson <david... (AT) yahoo (DOT) com> wrote:

Thanks,

The next decent weekend I'll give it a try.



"blazerman" <jerry (AT) peru-motors (DOT) com> wrote in
news:1173356248.188014.191360 (AT) 64g2000cwx (DOT) googlegroups.com:

you're welcome! jp



On Mar 8, 9:55 pm, David Wilkinson <david... (AT) yahoo (DOT) com> wrote: