Dose anyone have the wiring configuration for spark plug wires from
the plugs to the distributor? I have a 97 GMC 350 engine.
Thanks in advance.
Ray

On Mar 23, 2:52 pm, rayac... (AT) gmail (DOT) com wrote:
well, if it's a 350, then i would assume the order would be
1,8,2,5,4,3,7,2. the thing about messing up the order to the
distributor is that the rotor button isnt at TDC anymore and facing in
the right direction. what i would do, is look at the distributor from
the front right corner of the truck and line it up so its dead in
front of you. then see which post is almost in line with the corner.
this is usually the #1 post on the distributor. but it might be
different for yours. good luck

In article
<1174764196.477111.51470 (AT) l75g2000hse (DOT) googlegroups.com>,
"big.drizzt (AT) gmail (DOT) com" <big.drizzt (AT) gmail (DOT) com> wrote:

You know of a Chevy V-8 that has two number two cylinders and no
number six cylinder?

Try 1-8-4-3-6-5-7-2

Hee-Hee,
On my 95 5.7L the firing order is cast right onto the intake manifold.
Same as above
Ed