![]() | |
![]() |
| | Thread Tools | Search this Thread | Display Modes |
#1
| |||
| |||
|
#2
| |||
| |||
|
|
What length wiper blade (driver's side) does a 2001 PT Cruiser use? I went to Auto Zone to get one. The Anco book lists a 19" blade, the Bosch book lists a 21" blade. So the Auto Zone guy took out the 19" blade to install on my car. It was the wrong size. But then so was the Bosch. The one on the car was 20". From looking at the wipe area, the 21" would be too long, it would go off the window at the roof line. I guess the 19" would work, but you'd lose some of a cleaned area. |
#3
| |||
| |||
|
#4
| |||
| |||
|
|
Subject: Re: What length wiper blade?? PT Cruiser From: "Daniel J. Stern" dastern (AT) 127 (DOT) 0.0.1 I have thought long and hard about your question, given careful consideration to the description of your quest for the right wiper, and have come to the *tentative* conclusion that you might just need a 20" blade. ____Reply Separator_____ And that's almost the conclusion I came to also, that being I can use a 20 or 19" blade. Let me rephrase my question........Why would two manufacturers list two different sizes of which neither one is probably the correct size. |
#5
| |||
| |||
|
#6
| |||
| |||
|
|
its a 19 on drivers, 18 on passenger ____Reply Separator_____ Are you sure? It was a 20" on the car and it was an OEM blade. |
#7
| |||
| |||
|
|
Subject: Re: What length wiper blade?? PT Cruiser From: "Daniel J. Stern" dastern (AT) 127 (DOT) 0.0.1 I have thought long and hard about your question, given careful consideration to the description of your quest for the right wiper, and have come to the *tentative* conclusion that you might just need a 20" blade. ____Reply Separator_____ And that's almost the conclusion I came to also, that being I can use a 20 or 19" blade. Let me rephrase my question........Why would two manufacturers list two different sizes of which neither one is probably the correct size. |
#8
| |||
| |||
|
|
its a 19 on drivers, 18 on passenger ____Reply Separator_____ Are you sure? It was a 20" on the car and it was an OEM blade. |
#9
| |||
| |||
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
| |