Hi,

Does anyone have access to centrifugal and vacuum curves for distributors
used on Mini A series engines.
I have been reccommended to use an A+ dizzy on my engine but would like to
know what the curves are like and what the actual ID number is for an A+
distributor.
There must be a website somewhere with this info?

Thanks in anticipation....Dave

On Thu, 28 Sep 2006 08:10:17 +0100, "Dave Bullock" <daveb (AT) ihr (DOT) mrc.ac.uk>
wrote:

will know.
--
Regards, Chris (Please take out my car to reply by email)
---1967 Riley Elf----1978 Mini 1000----1965 Hillman Minx---
---1957 Standard 8---1979 Ford Capri---1969 Morris Minor---
---1966 Triumph Herald Estate--1972 Mini Clubman estate ---
********** Please don't email in HTML! **********

This may be of interest to you. Never used one, it was mentioned on a
spridget BB. http://www.123ignition.nl/brand/Mini.html

Dave Bullock wrote:

On Thu, 28 Sep 2006 08:10:17 +0100, Dave Bullock <daveb (AT) ihr (DOT) mrc.ac.uk> wrote:
Note that an A+ dizzy will not fit earlier engines - it has a different
drive and mounting.

--
Cheers,
Stan Barr stanb .at. dial .dot. pipex .dot. com
(Remove any digits from the addresses when mailing me.)

The future was never like this!