This is no doubt a stupid question, but you have to start somewhere. What does ping sound like? How would I know if the car was "pinging"? This is...

goodnigh

01-29-2007 07:52 PM
goodnigh

OK here it goes. Just replaced the actuator on the drivers side and the power lock functions great. Before i installed it i tested the voltages and...

bachey1@cox.net

01-29-2007 06:16 PM
bachey1@cox.net

Just bought a 2001 mustang convertable this summer, it was used, but in great shape. Had no problems up till now, The car has very low KM on it,...

cashbuys@shaw.ca

01-28-2007 11:00 AM
dans1942@gmail.com

I have an 86 Mustang GT Convertible. The check oil light is almost always on...I have checked the oil, changed the oil and filter but the light is...

earlykee@aol.com

01-28-2007 09:25 AM
nospam

At one time the center hole of wheels was not made to "locate" on the axle hub but instead the wheel got centered by the lugs and lug nuts. At some...

Ashton Crusher

01-28-2007 01:00 AM
Big Al

You didn't answer my question. -- Jason

Jason O

01-27-2007 07:57 PM
Spike

flatfish+++ wrote: It's about time Roy stop trolling and cross posting to a car news group. -- "One hard rule of sockpuppetry is that a...

schestowitz@wildmail.com

01-27-2007 02:41 AM
Roy Schestowitz

Have you try Linux? ,---- http://www.lumencreativegroup.com/2007/01/22/have-you-try-

schestowitz@wildmail.com

01-26-2007 03:10 PM
The Ghost In The Machine

Selling open source just keeps getting easier ,---- http://weblog.infoworld.com/openresource/archiv

schestowitz@wildmail.com

01-26-2007 11:11 AM
schestowitz@wildmail.com

Macraigor Systems Eases Embedded Development with Free GNU Tool Suite ,---- http://www.linuxelectrons.com/News/Embedded/Macr

schestowitz@wildmail.com

01-26-2007 11:11 AM
schestowitz@wildmail.com

Wii DVD Tool - Firmware read/write ,---- http://wiihacks.blogspot.com/2007/01/wii-

schestowitz@wildmail.com

01-26-2007 11:10 AM
schestowitz@wildmail.com

A Wake-Up Call to Microsoft?s PR Team ,---- http://pogue.blogs.nytimes.com/2007/01/25/a-wake-up-call-to-microsofts-pr-team/

schestowitz@wildmail.com

01-26-2007 11:09 AM
schestowitz@wildmail.com

Okay I am having a problem that has plagues me for about 80000 miles and nobody can give me a clue including Ford. When my engine is warm and stuck...

Redstang66

01-25-2007 03:53 PM
Redstang66

Thanks for any help you can provide. 92LX 5.0 I'm in Chicago area Tried to start it two days ago and the interior lights were dim and it wouldn't...

bml@ync.net

01-25-2007 10:10 AM
bml@ync.net

Have read the Boss 302 was rated at 290 HP but actually produced more like 400 HP. The 4V Cleveland was rated 280 to 300 HP. Is it possible it also...

goodnigh

01-25-2007 09:00 AM
Big Al

Hi Group, I have a '72 mach 1 that was originally an H code. Someone had put a 302 2V in it at some point, (which I removed). I built a 351C from...

nospam

01-23-2007 09:35 PM
elaich

Found a huge Mustang Photo Gallery at the following links (for all of you that are Stang Fanatics like...

Stang

01-23-2007 07:54 PM
dwight

How do you get the quarter window moulding off? How about the side view mirror? I cant get the speaker covers off?

dave

01-23-2007 07:45 PM
JohnV@nn

i have areal bad hesitation problem with my 91 ford p up 302 5 spd . if you lightly press the excellerator it wants to die ive spent alot of...

aubrey

01-23-2007 06:40 PM
aubrey

See: http://alexisparkinn.com/flight_simulator.htm Yep, the seat is out of our 2000 Mustang Convertible -- and it's still electrically...

Jay Honeck

01-23-2007 06:30 AM
Jay Honeck

I have a 69 mustang with a 351C. What grade of octane should I use & do I need to add an additive since we no longer have leaded gas. The engine is...

nmarlow

01-22-2007 08:32 PM
Jason O

1993 GT, stock, 5-spd, 2.73s, cat-back, timing bump. Going this route and got it narrowed down to two: Vortech V-2 SQ S-Trim or Paxton NOVI 2000

BradandBrooks

01-21-2007 10:31 PM
WindsorFox

Happened some time Wednesday night. Driver glass shattered, stuff from the pod was pulled out and lying in the seat, including registration card and...

JohnV@nn

01-21-2007 02:36 AM
My Name Is Nobody

I'm working on a '92 convertible. Need the power seat motor that makes the seats go up and down. anybody have one? -- Bob La Rocca Lindenhurst, NY

Bob La Rocca

01-20-2007 09:57 AM
Bob La Rocca

I have an 07 with a Classic Concepts Ducktail spoiler and would like a tape stripe like the 69 Mach 1's on the rear end. Does anyone know of...

indy

01-19-2007 03:46 PM
indy

What would cause the tach to go to zero with the engine still running then go all the way up and down. It's not in tune with the actual rpm of the...

landsteam@yahoo.com

01-19-2007 02:06 AM
Les Benn

Hi, seems like there is a bigger dead zone in the power steering, like +-5 degrees, where to adjust or fix? Fluid level is at the low mark

Bob A

01-18-2007 08:09 PM
Bob A

I have heard that 255/60/15s can fit on the back of a 67 coupe, but my 4 1/4" backspace cragers leave the tire sticking out past the fender. Does...

Will

01-18-2007 03:07 PM
Spike

can anytone help i am looking for a 1969-1970 mustng fastback want onet hat need sto be restored i had 2 but hen i moved they were stolen form me ...

herman kane

01-17-2007 04:02 PM
herman kane

Hi guys, I hope I'm not breaking this group's netiquette by posting a repair question, but I could not find a recent FAQ for r.a.m.f.m. Anyway,...

Dave J

01-16-2007 09:24 PM
Dave J

What is the weight of the 289? And the weight of the 200 C.I. 6? And does anybody know what the timing is for the 6? Thanks.

studeluver@peoplepc.com

01-16-2007 08:34 PM
elaich

Just a little story I feel the need to share: Several days ago my wife told me her brakes on her Mountaineer were making some noise. I drove it to...

wabbitslayer

01-16-2007 08:20 PM
Joe

On Mon, 15 Jan 2007 20:24:14 -0500, "�avïd" <one.DM3 (AT) esn (DOT) net> puked: We have about that many in the past two years, no? -- lab~rat ...

lab~rat >:-)

01-16-2007 07:51 AM
lab~rat >:-)

Classic Mustang Garage is a site for the Do It Yourself Mustang enthusiest. http://www.classicmustanggarage.com/classicmustanggarage/

mastermindgamer2002@yahoo.com

01-14-2007 03:46 PM
mastermindgamer2002@yahoo.com

should I just do heads or go for a crate motor ? or stroker? go up to 350 hp, about 400 torque or so I have a blower on it now, but if a bigger...

James Aforth

01-14-2007 11:10 AM
Michael Johnson

Any recommendations out there on coil overs for a fox mustang that function adequately and are not noisy?Will be used with MM caster/camber...

scott and barb

01-14-2007 10:29 AM
scott and barb

The reverse lockout rod was introduced in '70. What models carried this feature and when was it discontinued? This prevents the transmission from...

goodnigh

01-13-2007 08:46 AM
goodnigh

This holiday season I had the pleasure of spending 10 days behind the wheel of a Hemi Magnum. While I was previously impressed with the Chrysler LX...

NoOption5L@aol.com

01-12-2007 11:57 AM
Stefani Bowers

Who would you say is the best aftermarket brake manufacturer? Baer, Brembo, or any other you can mention? I guess for price, performance, and...

Nicholas Anthony

01-10-2007 09:25 PM
Ironrod

Would the rear-end (a complete drum-to-drum) from a 65-68 Mustang fit into a 64 Comet? I have a 64 Comet that needs a rear-end ....Thanks!

so427@hotmail.com

01-10-2007 07:42 PM
so427@hotmail.com

Do I win? 1990...Mustang GT Owned since new... Mods! Removed Air Silencer...

Jimmy

01-10-2007 12:47 PM
lab~rat >:-)

It's time to reward my wife for all of her years of hard work and devotion and putting up with my sh*t. The kids are mostly out of the house now. The...

JerryC

01-10-2007 07:56 AM
JerryC

I'm attempting to diagnose and fix a steering column on a 1983 Mustang GLX Conv. w/ tilt no delay. Once I got it apart I could see that the lock...

lastchance 83

01-10-2007 12:50 AM
Les Benn

HI, I got new wheels for my 67 mustang and I am pretty sure they were put on with a torq stick to prevent overtightening and therefore warping of the...

Will

01-09-2007 11:53 PM
Brent P

Beware and be warned. My 2006 Mustang GT Premium Coupe w/ auto trans. We took delivery of this Mustang on October 27th 0f this year. A brand new 2006...

GatorMan

01-09-2007 11:29 PM
trainfan1

elaich wrote: not that it matters but: The previously optional 289 c.i. 225hp V-8 was replaced by a 302 c.i. version rated at 230 hp. Increased...

01-09-2007 01:52 AM
DRAGNET

Believe whatever you wish but actually nobody has posted anything that disputed what I have said about the REASON for the three different ...

Grover C. McCoury III

01-09-2007 12:46 AM
My Name Is Nobody

Wow, I haven't visited anything related to USENET in quite a while. I didn't even set it up when I got my current laptop. I thought I'd stop by...

A Guy Named Steve

01-09-2007 12:16 AM
A Guy Named Steve

I've never heard of such. Am I out of the loop or is this a typo?? http://www.austousa.com/4sale/forsale-1580.html -- “I intended that "not stupid"...

WindsorFox

01-07-2007 12:24 PM
DRAGNET

Do I win? 1990...Mustang GT Owned since new... Mods! Removed Air Silencer...

Jimmy

01-06-2007 11:00 PM
Jimmy