I just rebuilt a 1971 F250 4x2 with a 360, c6 auto, and an after market AC. I have had constant problems with the engine running hot. So finally,...

David Glaser

07-16-2003 04:38 PM
David Glaser

That's the problem. The steering wheel shaft is in the way. So there's only one bolt that I'll have to remove to move the shaft? Thanks...

Tim Harden

07-16-2003 09:26 AM
Tim Harden

I have a 97 F250 LD 5.4 4x4 3.73 rear (I don't know which tranny). I bought it with 85k and have put 15k on since. I took it into the dealer for an...

mtpiper

07-15-2003 11:01 PM
lugnut

Hello! I am having a bit of a problem. Here is the situation - I bought my 1997 F250 diesel w/E4OD 4.10 4WD truck new in Oct 97. I tow a 5th...

Mike Erb

07-15-2003 10:30 PM
Mike Erb

My Ranger has been losing power and stalling in lower gears. The check engine light is on and I had an auto part store run diagnostics and...

Gene Strickland

07-15-2003 09:43 PM
Gene Strickland

I thought this might be of informational interest to everyone regarding evaluations of motor...

Mark R. Hansen

07-15-2003 05:56 PM
Tom J

The PCV valve on my '95 5.0L chatters at idle in park. It almost sounds like a buzzing soung. I've replaced the valve and the line connecting it to...

07-15-2003 05:16 PM

What do ya'll think. I think it looks a whole lot beter without the steps on it. I will be running it wednesday night(weather...

Erik D.

07-15-2003 04:56 PM
Blair Baucom

"Scott" <roadhousenospam (AT) pcweb (DOT) net> wrote They have better anti-drainback valves, thats for sure. Fram seems to have none. I'll never...

Jeremy Chavers

07-15-2003 03:34 PM
Mark Keith

try lmc.com or f100.com or dennis-carpenter.com they make replacement parts they have it--- "David Glaser" <glaser (AT) charter (DOT) net> wrote

Dennis

07-15-2003 09:53 AM
Dennis

Try L&L Products. http://www.landlproducts.com/main.htm SMC "KamPerSpesh" <2muchspring (AT) indaback (DOT) com> wrote

MOTO

07-15-2003 09:37 AM
Dennis

Thanks for your responses. I got an estimate at meineke today. $200 and they haven't seen it yet. No good deals on auto repair in Vegas. -- "My...

Scott

07-15-2003 01:52 AM
Scott

Are there any statistics available on how the middle passenger would fare in a truck (F250) with a bench seat. Does the right passenger air bag...

EJGroth

07-15-2003 12:26 AM
EJGroth

Does anyone have any experience with Flex-a-lite pusher fans. I would like to use it as an auxiliary pusher fan. I have a 1971 F250 4x2 with a 360...

David Glaser

07-14-2003 11:16 PM
David Glaser

B2723m wrote: He said more power though, and that he does alot of driving. 4.10's would definitely help out on acceleration, and also would help...

Forcefan83

07-14-2003 08:59 PM
CC

I lost my bolt for my 94 Ranger, not the eye bolt, but the other one that holds the spare tire up against the bottom of my bed. It looks very...

Sirius Kase

07-13-2003 09:32 PM
Sirius Kase

on my Ford, the fill plug is on the drive shaft side, top left, looking forward from driver's seat. It is drained by removing the rear...

Blair Baucom

07-13-2003 03:46 PM
Hackle

My Ranger has been losing power and stalling in lower gears. The check engine light is on and I had an auto part store run diagnostics and...

Gene Strickland

07-13-2003 10:58 AM
Gene Strickland

Hi all & thanks for so much good information. I have been following the posts regarding cleaning the MAF sensor to stop "pinging". I have a...

UncleDuke

07-13-2003 09:38 AM
E J B

97 F250 white long bed w/2 tanks. Complete with tail lights, tail gate and bumper. This is the old body style. It was only a year old...

andy asberry

07-13-2003 12:57 AM
andy asberry

97 F250 XL white long bed w/2 tank doors. Complete with tail lights, tail gate and bumper. This is the old body style. Bed was only a year old when...

andy asberry

07-13-2003 12:50 AM
andy asberry

Should be able to follow the positive battery cable to it. "Anonymous Sender" <anonymous (AT) remailer (DOT) metacolo.com> wrote

Mike O'Malley

07-12-2003 11:25 PM
429SCJ

Just picked up an 83 Ranger, 4x4 with the V-6 and 5spd manual. It currently has (and will be keeping) Michelen 30 x 9.50 x R15's all around. What...

Carl Saiyed

07-12-2003 10:44 PM
Carl Saiyed

The fuel gauge on my Ranger hasn't worked in quite a while (always read below empty) so I decided to replace the sender. After doing so, the...

Jack M. King

07-12-2003 06:50 PM
fredzo

Hi, This is an electrical question that maybe some Ford guru out there can answer. I have a '99 F350 V10 dually. Thursday evening I went out to...

jackgxyz@nuvox.net

07-12-2003 04:44 PM
Kevin Ward

I have a 93 AWD Aerostar extended minivan that has about 155,000 on it. The Trans was rebuilt at around 30,000 from Ford on a warranty from the...

07-12-2003 04:09 PM
Chris & Brandie

Well, the results are in....... I pulled the Montana 2880rl (10,000lbs loaded) on an extended vacation. Went from Portland, Or to Montana and back....

Ron Kilmer

07-12-2003 08:42 AM
B2723m

91 Full size Bronco with 351. 35inch tires. Has stock gears right now. Not sure what gears, maybe 3.55 or 3.73. I want at least 4.10s, are the 4.56s...

Pfunk20000

07-11-2003 11:15 PM
Sean Conolly

"Pfunk20000" <pfunk20000 (AT) aol (DOT) com> wrote : Have 91 Bronco. Passenger door wont unlock/lock when pressing the button. The : driver side...

David Ward

07-11-2003 09:42 PM
David Ward

I had this same problem years ago with a 1970 Blazer. The Blazer had positraction and the clutches were about gone. Every once in awhile it...

jor

07-11-2003 06:50 PM
jor

Folks, Just inspected the Rear step Bumper on my 2003 F-250 SD FX4, and at nine months old and with only 2800 miles on the baby she is already...

Spike457

07-11-2003 05:16 PM
Spike457

I am going to try to replace the headliner in my 89 F-150 standard cab. I bought the headliner material at the fabric store and a can of 3M foam fast...

Don

07-11-2003 01:00 PM
Steve Barker

I've got a '99 Ford F150. Probably the best vehicle I've ever owned - 93,400 miles on it today. I've got the stock rims (silver) and would like to...

Jim Mc Namara

07-11-2003 11:23 AM
Jim Mc Namara

This particular Yakima Roof Rack will fit the following: 86-93 Aerostar 83-90 Bronco II 90-94 Explorer 86-94 Taurus Wagon Thanks again....Joel

Ski Dog

07-10-2003 11:47 PM
Ski Dog

I have an older high milage truck. every once and a while when i start it i get a tapping noise, like either lifter tap or rod knock. goes away once...

Tater Schuld

07-10-2003 11:21 PM
Mark Keith

Boop's ShoutOut message has been changed into a private message at the their request. If you want to hear their shout message you will have to email...

Roseb441702

07-10-2003 08:49 PM
Roseb441702

I have a 93 f150 XLT with the 5.0L V8. Not sure what trannie model I have. Last few weeks, when the engine is still cold, it has been slipping...

Mister C

07-10-2003 08:39 AM
Mister C

I'm buying a 2003 Expedition. I would like to use the 18x9.5 rims from an F150 Lightning, with 285/65-18 BFG AT/KO tires. Does anyone know if this...

MWhite4981

07-10-2003 08:14 AM
MWhite4981

Wow...I'm glad I joined the ford trucks newsgroup so I can read everybodies political views. Later... Grant Speed Kills...Drive a Honda, live...

Forcefan83

07-09-2003 10:48 PM
Barry White

Just changed the inner(LH forward) tie rod. The old one clunked when twisted but the new one does a little. Not as much as the old one. ...

Cudighi

07-09-2003 10:10 PM
Cudighi

The info on the door jamb label on the 95 van I purchased indicates a tranny "E" and a rear axle "19". Can anyone help in the translation of these...

John

07-09-2003 09:16 PM
Lou Braun

In article <3f0af2fd_2 (AT) news1 (DOT) prserv.net>, "Mellowed" <Mel (AT) noaddress (DOT) com> wrote: Mine was on a line between the tranny and the...

Jeepers

07-09-2003 11:26 AM
Jeepers

Spent my July 4th 3-day holiday weekend stripping parts off several parts trucks for my '67 F-100 SWB. After doing some research on...

Keith

07-09-2003 02:43 AM
Keith

I suggest you use some penetrating oil rather than the 3 in 1. You can get it in a aerosol can at any parts store. Just spray the bolts several times...

jor

07-08-2003 10:24 PM
Jim K

*sniffs* I smell troll. -Mistercmk "Brian Slauson" <brandylover (AT) jacobsonmartt (DOT) net> wrote

Mistercmk

07-08-2003 05:19 PM
NoSpammmy42

We did it on our '80 bronco. Just used 3M 8080 spray adhesive. No special problems. -- Steve (here to have fun) Barker Stilwell, Kansas UP (MoPac)...

Steve Barker

07-08-2003 01:05 PM
Steve Barker

I recently replaced my intank fuel pump. The pump runs fine when bench tested but I get nothing when installed on truck. The fuel pump connector...

Jack M. King

07-08-2003 09:56 AM
Jack M. King

Anyone tell me the location and settings for this sensor. The Check EngineLight came on and AutoZone checked it and sold me the sensor but didn't...

jb

07-08-2003 09:46 AM
David Ward

Is this the same problem as valve rattle under load; i.e., going up a hill? I have this prob, and have been spending good $$ on supreme gas to solve...

J.J. Brinks

07-08-2003 05:55 AM
J.J. Brinks

HEy, thanks a lot Joe. Iv'e had a hard time finding any info on this - even in the CHilton manual. I was hoping you could expound a little (lot?:)...

UncleDuke

07-08-2003 01:28 AM
Joe G