| | Rating Thread /
Thread Starter | Last Post  | Replies | Views |
|  | I have a 1998 4.6L V8 cargo van with 60K miles on it and would like to get
new shocks all around.
It's usually lightly loaded - less than 400 lbs. ...
D T W .../\\...
|
07-07-2003 08:36 PM
D T W .../\\... | 0 | 13 |
|  | There are a million (well not a million but scads) of them for sale on ebay.
Where I got mine.
"Snowseeker" <lees5799 (AT) bright (DOT) net> wrote
bomar
|
07-07-2003 07:44 PM
bomar | 0 | 15 |
|  | How about painting yourself black and forgetting the bag? 8-/
Didn't know that, I always thought the bright white was "chevy
white". Ever see a...
alvinj@XX.com
|
07-07-2003 02:04 PM
Mark Keith | 1 | 14 |
|  | One tone of the horn in my '97 Explorer has gone dead. I know it's located on the driver's side somewhere below the battery / headlight area.
Can...
TEvans@ix.netcom.com
|
07-07-2003 12:37 PM
Ford Prefect | 1 | 13 |
|  | Will the inner fender aprons and radiator core support from a '73-'77
F-100 work on my '67 F-100? The galvanized aprons from the later models
SEEM to...
Keith
|
07-07-2003 07:10 AM
Keith | 1 | 14 |
|  | Hey folks!
I'm trying to locate a Proportioning Valve for a '73-'75 F-250 with drum
brakes - part number C8TZ-2B257-C - if anyone out there has one...
Gord H
|
07-07-2003 03:16 AM
Gord H | 0 | 14 |
|  | I have a 91 bronco, when the motor is
really hot, it turns over really slow, like it
is gonna guy. Is that the same thing as you are talking about?...
Pfunk20000
|
07-06-2003 11:18 PM
jor | 1 | 16 |
|  | Greetings,
Newbie here. I have a 1987 Ford F250 with the 460. This morning when I
went to drive the truck, it started right up and died, then I...
Brett
|
07-06-2003 09:39 PM
tater schuld | 4 | 16 |
|  | "Ken" <kenfromtn (AT) hotmail (DOT) com> wrote
Just wanted to let everyone know what I have found so far. On another
discussion board someone...
Ken
|
07-06-2003 08:35 PM
Norm | 2 | 16 |
|  | How about all you cross posting fools that took the bait from this dump ass
troll keep you stupid replies inside your own...
Jerry
|
07-06-2003 08:19 PM
Jerry | 0 | 14 |
|  | On Sun, 06 Jul 2003 12:35:20 -0400, dalan35 rearranged some electrons to
form:
NP. Good luck getting it fixed, and let the group know if we were...
dalan357@webtv.net
|
07-06-2003 06:58 PM
David M | 2 | 17 |
|  | I'll will be taking my Ff150 off comprehensive insurance,
any suggestions on 'effective' anti-theft devices will be
appreciated. Thank You.
moli n ny
|
07-06-2003 04:40 PM
Herbert Foster | 8 | 15 |
|  | 1. Air in lines
2. Master cylinder
"steve" <shfoster (AT) usa (DOT) net> wrote
bomar
|
07-06-2003 08:48 AM
steve | 2 | 16 |
|  | I've got an 85 F150 that I'm parting out and I believe still have these.
(It's at my mom's farm 50 miles from here). You can have one for $5.00...
forddriver
|
07-06-2003 06:28 AM
Norm | 3 | 16 |
|  | Hi Everybody, like some help on changing my 92 F150 left upper B joint. I
saw the new part, it has a snap on ring to hold it so how hard is it...
bill
|
07-06-2003 01:46 AM
bill | 0 | 14 |
|  | daler218 (AT) mchsi (DOT) com (Dale Randall) wrote in
<wz0Ma.69252$3d.30974@sccrnsc02>:
Yes, that's the ticket: Let's all just sing a chorus of...
Charles Perry
|
07-05-2003 07:17 PM
Jim | 9 | 22 |
|  | Stock trucks do not have anything in the chip slot, which is in the PCM (
big expensive box above left foot).
My SCMT on 80 hp raised mileage 1.5 -2...
bomar
|
07-05-2003 06:23 PM
Matt Macchiarolo | 2 | 21 |
|  | Anti car PC fascists!
"Robert Jensen" <rwjensen (AT) removethiscox (DOT) net> wrote
Rodrigo Diaz
|
07-05-2003 05:58 PM
Rodrigo Diaz | 0 | 12 |
|  | "Joe" <Joe (AT) dontspam (DOT) net> wrote
van was wayyyy late arriving after he ordered it.
when it came in, I was looking it over,and mentioned...
mark hoffman
|
07-05-2003 05:17 PM
alvinj@XX.com | 3 | 15 |
|  | What bothers me is how DuraLube doesn't actually say what the
additive is that does all the cool things it does. Does anybody
know what it is? Same...
alvinj@XX.com
|
07-05-2003 04:30 PM
alvinj@XX.com | 0 | 12 |
|  | I guess I'm going have to eat some humble pie. It looks like the problem
was not an exhaust system restriction.
After I put the flowmaster on the...
David Glaser
|
07-05-2003 04:24 PM
alvinj@XX.com | 1 | 23 |
|  | Here is a great one for road trip hitching.
http://www.ez-hitch.us
Bill Dance endorsed EZ-HITCH
|
07-05-2003 01:36 PM
Steve Barker | 2 | 15 |
|  | How many oxygen sensors would this have? Is there an easy way to figure it
out? Where would I look?
My check engine light is on, due to this I...
Chris
|
07-05-2003 01:34 PM
bomar | 1 | 18 |
|  | Do diesels ever need injector cleaner?
TIA,
brad/texas
B2723m
|
07-05-2003 01:17 PM
B2723m | 0 | 13 |
|  | hey yall
I'm the proud owner of a 91 ford f-150 with 310000 miles on her. she
still runs good but blows oil out of everyplace there is to blow...
James Nash
|
07-05-2003 12:21 AM
James Nash | 0 | 13 |
|  | Hi all. First of all I would like to thank the people that replied to other
owners with "pinging" problems. I'm going to try that MAF cleaning on...
UncleDuke
|
07-04-2003 04:10 PM
Joe G | 2 | 10 |
|  | Hi All
I was wondering if anybody knew of a web site where I could buy parts
for a 56 ford truck
thanks
zeek
Froats
|
07-04-2003 11:47 AM
jor | 3 | 15 |
|  | I cleaned the MAF in my '99 3.0 Ranger twice in the past two months. The
first time with just carb cleaner, the second time with carb cleaner and...
Scott Mangold
|
07-04-2003 11:15 AM
fredzo | 2 | 13 |
|  | Gentlemen,
I've notice a leak (appears to be faulty gasket) where the transmisson
extension bolts to the transmission (right in front of the...
Jack M. King
|
07-04-2003 11:07 AM
fredzo | 1 | 17 |
|  | I think about the new Ford tranny and if it would hook up to the 7.3 .
I would be interested if it is possible after my warranty ran out , but
I...
silverfox
|
07-03-2003 10:00 PM
silverfox | 2 | 14 |
|  | The OTHER Kevin in San Diego wrote:
I know, I miss it greatly, but the ticker was telling me otherwise. Wouldnt
want it to stop working while...
Ford Prefect
|
07-03-2003 01:39 PM
Ford Prefect | 1 | 16 |
|  | The article is over 2 years old.
ChrisW wrote:
Drew
|
07-03-2003 01:38 PM
Ford Prefect | 2 | 18 |
|  | No, but..... I have a 94 Ranger 4.0/5sp that does the same thing IF I use
regular gas. some brands of gas work better than others. I thought I was...
UncleDuke
|
07-03-2003 07:32 AM
UncleDuke | 0 | 13 |
|  | Hi all have a question would like some insight on i have a 98 explorer 4wd
with 6 cylinder. I am planning a trip to florida and would like to take...
Stu W
|
07-03-2003 06:14 AM
David M | 1 | 14 |
|  | Replace your plug wires (and plugs).
Good luck.
On Mon, 30 Jun 2003 15:27:00 -0400, "Frank K." <fkozerski (AT) comcast (DOT) net>
wrote:
delete my name
|
07-02-2003 10:25 PM
ChrisW | 1 | 17 |
|  | "The OTHER Kevin in San Diego" <skiddz *AT* adelphia *DOT* net> wrote in
message news:gss6gv04ac804aqgi6jbrulci30pgattvt (AT) 4ax (DOT) com...
I...
Tom J
|
07-02-2003 07:15 PM
Tom J | 0 | 18 |
|  | I've got a 1990 Aerostar (3.0L) that will turn over but won't start. Has
fuel and new fuel filter. I've also run a code reader on it and got an...
Jack M. King
|
07-02-2003 03:43 PM
Jack M. King | 0 | 20 |
|  | Just wondering about the fuel economy for the F-150's. I've seen their web
site and most say 16/20. I'm looking to possibly getting a supercab...
Rosscoe
|
07-02-2003 03:41 PM
Mellowed | 2 | 20 |
|  | Tiny wrote:
Not too bad, you should put a k&n on it and some exhaust and try to hit
some 15's. It shouldn't be too hard. Gotta love people who...
Erik D.
|
07-02-2003 03:27 PM
Sean Conolly | 1 | 18 |
|  | My OD will not disengage at any speed, any gear. For a while I could get it
to come out in 2nd
gear, like thats a lot of good. Has anyone else had...
Spencer
|
07-02-2003 10:11 AM
BD | 1 | 17 |
|  | On Mon, 30 Jun 2003 04:19:03 GMT, "Guido"
<princegeorgeman (AT) hotmail (DOT) com> wrote:
No. Besides, that engine in that truck will likely not...
Chris Hill
|
07-02-2003 08:19 AM
Chris Hill | 0 | 18 |
|  | Hey all...I posted a request a week or so ago for info on my latest
project, a '67 F100. Got some great references to websites and have been
checking...
Keith
|
07-02-2003 03:36 AM
Mark Keith | 3 | 25 |
|  | i have a 86 mustang, and it surges in low gear, like a cam lope but
not smooth at all, the rpms surge at an idol also, from 600- 1200 rpms,
i need...
mark
|
07-02-2003 12:39 AM
Joe G | 3 | 14 |
|  | Honestly NOPE. SOrry out of luck there, last check it was an assembly at
PBLM * palm beach lincoln mercury* 110 or so walk in 55 my cost..
Litl...
Joe G
|
07-02-2003 12:00 AM
Joe G | 0 | 18 |
|  | Replacing a clutch that does not slip is a waste of money. ON THE OTHER
HAND, it always seems dumb NOT to replace it if you have it out. ...
Steve Barker
|
07-01-2003 11:45 PM
pyotr filipivich | 2 | 25 |
|  | I've built a 393 stroker moter for my '82 Bronco.
Before it became a 393 it had an Edelbrock Performer
and a Holley 600 cfm double pumper.
I can...
badmoon9031@yahoo.com
|
07-01-2003 11:40 PM
badmoon9031@yahoo.com | 0 | 26 |
|  | Spongebob wrote:
There were 2,280 lightnings made in 1995. You should check out
www.nloc.net for more information on these great trucks!
Erik...
Erik D.
|
07-01-2003 06:43 PM
Erik D. | 2 | 17 |
|  | "Steve Barker" <railphotonut (AT) not (DOT) hotmail.com> wrote in message
Wow, you'd think that they would make that harder to change. did it in
15...
tater schuld
|
07-01-2003 10:39 AM
Tater Schuld | 2 | 14 |
|  | donn1 (AT) shaw (DOT) ca
any help appreciated
Thanks
Guido
|
07-01-2003 09:45 AM
MOTO | 2 | 16 |
|  | no, he means MobilOne 5W20 Synthetic Engine Oil
I have it out in several F-350 4WD 7.3 PS Turbo's and it works........two of
these trucks belong to...
Gary Glaenzer
|
06-30-2003 11:00 PM
Gary Glaenzer | 0 | 17 |