| | Rating Thread /
Thread Starter | Last Post  | Replies | Views |
 |  | I've got a'95 F250 SC PSD with power door locks. There clearly is not
an RKE (Remote Keyless Entry) module in the truck, but there is a
curious...
garybla
|
01-07-2007 10:17 PM
Ford Tech  | 2 | 13 |
| | | I have a 1995 Ford F-150 5 liter truck. About once a month it will
start skipping and almost cutoff. It has a lot of black smoke coming
out of the...
Robbie
|
01-07-2007 09:24 PM
Ford Tech | 1 | 10 |
| | | I have a 1996 F-superduty, five speed diesel. The biggest qualm I have with
it is that it is geared very low, so that it turn about 3k RPM @ 60mph. ...
M Warren
|
01-07-2007 07:24 PM
Ford Tech | 11 | 15 |
| | | "David M" <NOSPAM (AT) nospam (DOT) com> wrote
While that is all well and good for a tach. That wire will put off a signal
during crank as well as...
The Iron Giant
|
01-07-2007 01:03 PM
aarcuda69062 | 5 | 8 |
| | | 1989 E350, No back heater, just the dash heat: When the selector is on
'heat' there is no blowing of hot air from the vents but when I put...
Ted
|
01-07-2007 07:56 AM
Ford Tech | 6 | 17 |
| | | i have a python 1400 xp remote starter. it was installed in my chevy p/u in
2002. i bought my expy in june of 06 and had the starter moved into...
Dave
|
01-07-2007 07:21 AM
Ford Tech | 8 | 11 |
| | | Hi All,
I have a 2003 Aviator with a 4.6L. The Check Engine light came on with
codes 0302 and 0308 (misfires). The dealer changed the plugs...
Frosty
|
01-07-2007 06:30 AM
Ford Tech | 2 | 23 |
| | | I recently posted aobut my 5.8L v8 F-150 going bonkers after a recently
installed new ECM.
Well...My trouble has continued...
IN THE RAIN, the...
Yabahoobs
|
01-07-2007 06:05 AM
Ford Tech | 2 | 11 |
| | | My dome light(s) no workie. They work fine with the ceiling switches but
don't come on when I open the door-any door.
Now of course, I know...
dumbneasy
|
01-07-2007 06:02 AM
Ford Tech | 3 | 14 |
| | | 97 Mazda B4000 5-speed, 4WD.
I bought this truck used a year or so ago. Purchased the extended
warranty with it.
After a couple of months I...
Kickin' Ass and Takin' Names
|
01-07-2007 05:46 AM
Ford Tech | 4 | 20 |
 | | I see that thread was crossposted a lot!
"David M" <NOSPAM (AT) nospam (DOT) com> wrote
Steve Barker LT
|
01-07-2007 05:38 AM
Ford Tech | 30 | 31 |
| | | I have a 2002 F350 7.3 liter diesel. I've been having some issues with
it for the past five or six months. It started with a the engine
starting to...
Safety man
|
01-07-2007 05:12 AM
Ford Tech | 3 | 15 |
| | | Have a 2001 lincoln town car.....I couldn't find any Lincoln news groups. I
hope I don't offend anyone by asking for help from this...
Donald Camps
|
01-07-2007 05:04 AM
Ford Tech | 3 | 14 |
| | | My 2004 F-150 now has a bad shimmy in the front end. It doesn't so much
feel like a side-to-side shimmy. It's more like and up and down shimmy.
But...
Dr. Phibes
|
01-07-2007 05:01 AM
Ford Tech | 20 | 35 |
| | | I have a 96 Ford Explorer XLT w/ 87,000 miles on it. Recently, I have
been having "creaking" noises coming from the right front. I believe
it is...
olsonp2@spu.edu
|
01-07-2007 04:24 AM
Ford Tech | 3 | 16 |
| | | Hey yall,
Sorry about the multiple posts to some of the threads. I keep getting an
error message about a thread here, and I thought it wasnt posting...
Ford Tech
|
01-07-2007 03:56 AM
Ford Tech | 0 | 9 |
| | | Hi
Drove my Bronco to a friends house about a mile away, no problem. Came out
after 30 minutes and was unable to start the truck. I put the key in...
Nick Harvey-Phillips
|
01-06-2007 07:29 PM
Jeff Strickland | 3 | 8 |
| | | I have a 99' F350. It has disc brakes and a Triton v10. Yesterday the ABS
light came on and it started shifting hard. After that the engine light...
Wonky
|
01-06-2007 01:51 AM
Ford Tech | 4 | 14 |
| | | I getting ready to wire my 91 F150 with a third party electric brake
controller.
Under the dash is a factory wiring harness with 3 wires for...
emcook@charter.net
|
01-06-2007 12:51 AM
Ford Tech | 9 | 10 |
| | | My '95 Bronco (5.8L, Eddie Bauer) makes a noticible clunk -- 3 of them
really -- when I start going from a standing stop. It also makes a...
Jeff Strickland
|
01-05-2007 11:25 PM
Ford Tech | 12 | 35 |
| | | My accelerator cable busted on my '87 F-150. I went ahead and bought the
replacement cable. The pieces are crimped on both ends so I assume that...
Mark Cranford
|
01-04-2007 04:29 PM
Mark Cranford | 0 | 12 |
| | | I'm going to be storing my 2005 F350 diesel for two months. Should I be
disconnecting the batteries? I've stored gasoline autos for longer...
rvfulltime
|
01-04-2007 04:15 PM
djdave | 6 | 7 |
| | | got a big crease-type dent in the driver's side door on my 97 Ranger, the Ford body shop
wants $1100 to do it up right, new sheet metal and paint.
I...
I Love Edsels
|
01-04-2007 11:51 AM
I Love Edsels | 0 | 10 |
| | | Took my 89 F150 on a trip Christmas to see the family. Trip was about
75 miles each way over some decent sized mountains. Got there OK, but
when I...
Nemisis
|
01-03-2007 04:39 PM
SC Tom | 4 | 9 |
| | | F-350 7.3 Ltr. Turbo Diesel; has a slow fuel leak coming from the fuel
pump/filter
area, trouble shooting tips?, Maybe lots of light on the subject...
Expediter
|
01-01-2007 11:55 PM
Expediter | 0 | 14 |
| | | I posted this one over in Ford Tech as well, still looking for an
answer.
Hey Gang,
I'm having a problem with the ignition on my truck. I know what...
lorenbachman@gmail.com
|
01-01-2007 02:12 PM
Jeff Strickland | 5 | 8 |
| | | anyone out there have any good or bad luck running the "off road" red
diesel in there power stroke?
Thanks
M
gus@444.nnet
|
12-31-2006 02:43 PM
Matt Macchiarolo | 13 | 20 |
| | | sorry but you misunderstood. I WANT to take the fenders off to replace thme
with new ones, the problem "was" getting the headlamp doors off on order...
news
|
12-31-2006 11:51 AM
news | 1 | 10 |
| | | my ranger 4.0 automatic,4X4 80,000 miles,any preventive needing attention
Tom
|
12-30-2006 10:17 PM
Tom | 0 | 10 |
| | | well i have a 1989 ford ranger ext cab, one day i was driving and i hit a
pothole. now my dash lights and my AC light, isnt working, could you help...
Jody
|
12-30-2006 07:02 PM
Jody | 0 | 10 |
| | | a friend of mine is replacing the wires on his truck but forgot to
measure out the old spark plug wires. might anyone have the correct
wire lengths...
mowgly
|
12-30-2006 01:44 PM
mowgly | 0 | 7 |
| | | I started my Bronco yesterday. It ran for a second or two and died. Now, it
just cranks and cranks. The trouble codes (4 of them) say that each of...
Jeff Strickland
|
12-29-2006 04:10 PM
Jeff Strickland | 8 | 9 |
| | | ive had many problems with my carburetor in general...i recently had it
rebuilt and my truck is starting up fine now...however, im not sure i
am...
PaulJaroszewski@gmail.com
|
12-28-2006 03:47 PM
Mike H | 1 | 12 |
| | | Y'all-
I have a 2006 F150 STX 4.6L...
I loved the throaty sound my dual exhaust gave my ranger, now the question
is... what should I put on my...
SGT M
|
12-28-2006 12:15 AM
SGT M | 0 | 12 |
| | | Fits 4 door drivers side 2004+up truck gray with wood trim.
Didn't know you had your own group or I would have offered it here
first.
ebay...
Hooked
|
12-27-2006 08:24 PM
Hooked | 0 | 13 |
| | | The remote door unlock programming instructions state to locate the
connector at the base of the steering column...... Can anybody give a
better...
rwhatley@tampabay.rr.com
|
12-27-2006 12:16 PM
pax1961@gmail.com | 4 | 15 |
| | | The switch to engage 4 wheel drive has stopped working. Place the truck
in neutral, apply the brake and turn the switch. Nothing happens. No
light...
steve_hover@dell.com
|
12-26-2006 02:48 PM
jmolnar982@comcast.net | 4 | 26 |
| | | Thanks for the good tips of wisdom. LOL I guess I will buy an alarm/Remote
start system and install it like I did in my Explorer. That one I used...
respk
|
12-26-2006 01:41 AM
Krusty | 11 | 20 |
| | | After replacing the head gasket and everything above it, I have come to
the final steps in re-assembly before I light the fires. However, I
spent an...
NeedForSpeed3685
|
12-26-2006 01:31 AM
Paul Brown | 2 | 5 |
| | | Hi all, I have been chasing this noise for a couple of months now, I
found this Topic from 2002 today by Mike Mayer, and his description is
Identical...
4XMadness
|
12-25-2006 11:44 PM
jklapp@comcast.net | 4 | 20 |
| | | "David M" <NOSPAM (AT) nospam (DOT) com> wrote
Fuel pressure wont have a thing to do with no spark.
Do you have power to the ignition coil? Is...
Wolfie 31
|
12-25-2006 08:51 PM
Wolfie 31 | 2 | 11 |
| | | Thanks for the responses.
I guess the independant I went to is pretty much in line with others at
$60.00 an hour labor.
Bill Benson
|
12-24-2006 09:30 PM
Whitelightning | 1 | 9 |
| | | I have a 99 Mazda B-4000 4x4 (identical to Ford Ranger XLT). I took it in to
the dealer for an oil change and immediately when I started the truck...
mrlang64
|
12-23-2006 03:02 PM
PaulJaroszewski@gmail.com | 1 | 11 |
| | | lugnut wrote:
Ok, thanks.
Brian
--
Default User
|
12-23-2006 01:14 PM
Default User | 8 | 19 |
| | | David M:
Outstanding. Thanks for the info.
--
Mac Cool
Mac Cool
|
12-22-2006 09:49 PM
Mac Cool | 5 | 15 |
| | | I'm thinking about swapping my original 5.8 (351) for a 5.4 Triton in
my 1978 F-150. What are my chances?
joe.e.morris@gmail.com
|
12-22-2006 12:48 PM
Brad | 10 | 19 |
| | | Can I put a 1997-2003 truck bed on a 1989 f150?
gameboygeek46@hotmail.com
|
12-21-2006 04:18 PM
gameboygeek46@hotmail.com | 0 | 13 |
| | | I just purchased a 1998 F-150. I've been driving it around...nothing
special...for two days now. I was filling it up with some gas, and
tried...
Yabahoobs
|
12-20-2006 11:52 PM
aarcuda69062 | 3 | 23 |
| | | Hello all,
I am chasing a squeak/squeal noise that my gut tells me is coming from
the fan clutch, but others correctly point out could be from the...
Bill Schwab
|
12-20-2006 01:42 PM
Bill Schwab | 18 | 19 |
| | | Does anyone know if these are interchangeable? I have a 223 (1962) but
could get a manifold from the 300 (1964) - will the 300 work on the...
Old F-100
|
12-17-2006 07:25 PM
Steve Barker LT | 1 | 14 |
