Been having a bit of trouble removing the key from the ignition switch for
a few days. Went to use the car last night and now there is no way to get
the key into the switch. Reading the shop manual tells me once I have the
shrouds off I will have to be able to rotate the cylinder into the "run"
position in order to un-link it from the rest of the mechanism. Is there
another way to get the switch out? This is not the original switch.

On Sat, 31 Oct 2009 19:48:45 -0500, Peter W Crisler
<pwwjcrisler (AT) insightbb (DOT) com> wrote:


Spray a bunch of WD-40 or silicone or some other light lube in there
and then try the key again. Normally you would not use that kind of
stuff in a key cylinder because it will attract dirt but in this case
you only need to get it working one or two more times so you can
replace it.

Peter W Crisler wrote:

sometimes ... all one has to do is go in there and tighten everything up
and the ignition steering lock mechanism fits better and of course works
better if it is OEM

Ashton Crusher <demi (AT) moore (DOT) net> wrote in
news:npnpe5pfs8a1ak18cibdmvb7u1brils8m2 (AT) 4ax (DOT) com:

I'll give it a try. This second switch was put in about 4 years ago by a
Lincoln Mercury dealer, that is no longer in business and the dealer that
took over is on top the BBB's list of places to stay clear of.

Thanks, when I get it opened up, I'll see what is loose and see what shape
everythins is in. After 18 years, I have come to expect everything and
anything.