hey dude i have a 90 park ave and i just had the same problem about a
week ago. your heater blower is undeer the hood, look on the firewall
and there will be a plastic cover that says "maxifuse/relay center".
take it off. right on the middle of the firewall should be a a black
motor with a wire harness and a little tube connected to it there are
(5) seven mm bolts holding it on the firewall. disconnect the little
tube from the CAR leaving it connected to the motor. take the wire
harness off, then loosen the screws holding it on. by now, it should
be off. reverse for replacement. this thing is about $70 if not
more at your local autozone. hope this helps i suggest you
invest $20 in a HAYNES repair manual for that car. I did, best
investment i ever made on mine.