![]() | |
![]() |
| | Thread Tools | Search this Thread | Display Modes |
#1
| |||
| |||
|
#2
| |||
| |||
|
|
I'm hoping someone can help me out by pointing the way to a wire harness diagram for a 1996 Regal 4 dr (3.8 L). Here is the problem....I was told my brake lights were not working except for the one in the rear window. I confirmed this, all else was fine. I proceeded to check the bulbs (I changed them all out last month) they were all ok. I took it to my brother's place to use his multimeter to check the connections. All the plugs appeared ok but after checking, the park, markers, running lights and dashboard lights stopped working in both front and rear. I checked the plug in the trunk and it does not appear they are getting any power. Right now, only the headlights, turn signals, emergency flashers, backing lights, and rear window brake light are working. The brake lights themselves are working intermittently. I checked the fuses but they all appear ok. The Chiltons book I have does not have good enough diagrams for me to figure this out. Any help or ideas would be greatly appreciated. |
#3
| |||
| |||
|
#4
| |||
| |||
|
|
Liz wrote: (1996 Regal 3.8 L). Turn signals work OK. Brake lights are working intermittently. Brake lights in rear window work OK. Any help or ideas appreciated. _________________________________ Problem may be a bad turn signal switch. Brake lights use same bulbs as turn signals. Brake pedal switch sends power to turn signal switch in steering column. Turn signal switch position decides whether to turn on brake lights or to flash them as turn signals. Possible cheap fix: Move turn signal lever repeatedly through its full range of motion to clean corrosion on switch contacts. Good luck. Wendy & John. ____________________________________ |
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
| |