AutosTalk Forums  

Oil Pump

General Motors Discussions About General Motors vehicles (alt.autos.gm)


Discuss Oil Pump in the General Motors forum.



Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old   
Mike & Chris
 
Posts: n/a

Default Oil Pump - 02-27-2007 , 06:55 PM






Does anyone know how to adjust the pressure on an oil pump on a 1991 4.3
litre Astro Van. Someone said there is a spring that has to be adjusted if
so were is it

Thanks Mike



Reply With Quote
  #2  
Old   
Doug Adams
 
Posts: n/a

Default Re: Oil Pump - 02-27-2007 , 07:45 PM






Good news, yes there is a spring that can be shimmed to increase the oil
pressure or put a weaker spring in to lower the pressure.

Bad news, you have to drop the oil pan to get to it. The oil pump can then
be taken off the main bearing cap and taken apart. There is a pin holding
the spring in, that has to be driven out. While you have the spring out you
may as well pull the relief valve out and clean it, chances are you have
dirt in the relief valve, if the problem is truly the oil pump. The other
reason for low pressure is worn bearings.

Hope this helps!


"Mike & Chris" <mammendolia (AT) cogeco (DOT) ca> wrote

Quote:
Does anyone know how to adjust the pressure on an oil pump on a 1991 4.3
litre Astro Van. Someone said there is a spring that has to be adjusted if
so were is it

Thanks Mike




----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----


Reply With Quote
  #3  
Old   
Mike & Chris
 
Posts: n/a

Default Re: Oil Pump - 02-27-2007 , 09:40 PM



Thanks that's what I thought. I replaced it with a new pump and the pressure
is 50psi instead of 40psi when the engine is warm.

Thanks again Mike
"Doug Adams" <adamsfam (AT) wcnet (DOT) org> wrote

Quote:
Good news, yes there is a spring that can be shimmed to increase the oil
pressure or put a weaker spring in to lower the pressure.

Bad news, you have to drop the oil pan to get to it. The oil pump can then
be taken off the main bearing cap and taken apart. There is a pin holding
the spring in, that has to be driven out. While you have the spring out
you
may as well pull the relief valve out and clean it, chances are you have
dirt in the relief valve, if the problem is truly the oil pump. The other
reason for low pressure is worn bearings.

Hope this helps!


"Mike & Chris" <mammendolia (AT) cogeco (DOT) ca> wrote in message
news:Gw3Fh.2315$fr.898 (AT) read2 (DOT) cgocable.net...
Does anyone know how to adjust the pressure on an oil pump on a 1991 4.3
litre Astro Van. Someone said there is a spring that has to be adjusted
if
so were is it

Thanks Mike





----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet
News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption
=----




Reply With Quote
Reply




Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.