AutosTalk Forums  

How do I engage 4 wheel drive in a 1988 Wagoneer

Jeep and Willys Vehicles Discussions on Jeep and Willys vehicles. (rec.autos.makers.jeep+willys)


Discuss How do I engage 4 wheel drive in a 1988 Wagoneer in the Jeep and Willys Vehicles forum.



Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old   
mcarrari@roadrunner.com
 
Posts: n/a

Default How do I engage 4 wheel drive in a 1988 Wagoneer - 04-14-2007 , 05:58 PM






I am trying to purchase a 4 wheel drive 1988 Grand Wagoneer but I
don't know how to engage the 4 wheel drive high and low and the owner
doesn't know either. It is obviously very important to know if the 4
wheel drive works. Any help you guys can provide would be welcome. Are
there any particular weak points that I should know about and look for
prior to purchase expecially if it was abused. I know these are pretty
basic questions but have pity on me.


Reply With Quote
  #2  
Old   
Earle Horton
 
Posts: n/a

Default Re: How do I engage 4 wheel drive in a 1988 Wagoneer - 04-14-2007 , 06:15 PM






If this is Quadratrac it is a full time four wheel drive. High-low range
was an option in that case. This is a vacuum controlled unit, that is very
picky about having the right kind of fluid put in it. If you don't see a
switch or a lever it might not have low range. There may be an owner's
manual in the glove compartment, you never know.

The Full Size Jeep Association web site might have useful information too.

http://www.ifsja.org/tech/index.html

Earle

<mcarrari (AT) roadrunner (DOT) com> wrote

Quote:
I am trying to purchase a 4 wheel drive 1988 Grand Wagoneer but I
don't know how to engage the 4 wheel drive high and low and the owner
doesn't know either. It is obviously very important to know if the 4
wheel drive works. Any help you guys can provide would be welcome. Are
there any particular weak points that I should know about and look for
prior to purchase expecially if it was abused. I know these are pretty
basic questions but have pity on me.




Reply With Quote
  #3  
Old   
L.W. \(Bill\) Hughes III
 
Posts: n/a

Default Re: How do I engage 4 wheel drive in a 1988 Wagoneer - 04-14-2007 , 06:29 PM



Tell us what you have by the fifth number in it's VIN:
http://www.billhughes.com/temp/8188VIN.jpg I sounds to me like the seller
may be covering for a failed full-time viscous coupler:
http://www.masoncomputing.com/np249/
God Bless America, Bill 0|||||||0
mailto:LWHughes3rd (AT) aol (DOT) com


<mcarrari (AT) roadrunner (DOT) com> wrote

Quote:
I am trying to purchase a 4 wheel drive 1988 Grand Wagoneer but I
don't know how to engage the 4 wheel drive high and low and the owner
doesn't know either. It is obviously very important to know if the 4
wheel drive works. Any help you guys can provide would be welcome. Are
there any particular weak points that I should know about and look for
prior to purchase expecially if it was abused. I know these are pretty
basic questions but have pity on me.



--
Posted via a free Usenet account from http://www.teranews.com



Reply With Quote
  #4  
Old   
Michael
 
Posts: n/a

Default Re: How do I engage 4 wheel drive in a 1988 Wagoneer - 04-14-2007 , 06:31 PM



Earl,

I didn't mention, but there is a dash mounted switch for 2 wheel drive and 4
wheel drive and a floor mounted lever for low 4 and high 4. When I switched
the dash mounted switch to 4 wheel and lifted the lever to 4 low I don't
detect any discernible difference. Am I supposed to be stopped and put the
transmission in neutral and then lift the lever for 4 low?
Boy o boy am I confused.


"Earle Horton" <gracioso (AT) usa (DOT) com> wrote

Quote:
If this is Quadratrac it is a full time four wheel drive. High-low range
was an option in that case. This is a vacuum controlled unit, that is
very
picky about having the right kind of fluid put in it. If you don't see a
switch or a lever it might not have low range. There may be an owner's
manual in the glove compartment, you never know.

The Full Size Jeep Association web site might have useful information too.

http://www.ifsja.org/tech/index.html

Earle

mcarrari (AT) roadrunner (DOT) com> wrote in message
news:1176591535.346414.234340 (AT) q75g2000hsh (DOT) googlegroups.com...
I am trying to purchase a 4 wheel drive 1988 Grand Wagoneer but I
don't know how to engage the 4 wheel drive high and low and the owner
doesn't know either. It is obviously very important to know if the 4
wheel drive works. Any help you guys can provide would be welcome. Are
there any particular weak points that I should know about and look for
prior to purchase expecially if it was abused. I know these are pretty
basic questions but have pity on me.






Reply With Quote
  #5  
Old   
Michael
 
Posts: n/a

Default Re: How do I engage 4 wheel drive in a 1988 Wagoneer - 04-14-2007 , 06:46 PM



The fifth number is a J.
"L.W. (Bill) Hughes III" <billhughes (AT) cox (DOT) net> wrote

Quote:
Tell us what you have by the fifth number in it's VIN:
http://www.billhughes.com/temp/8188VIN.jpg I sounds to me like the seller
may be covering for a failed full-time viscous coupler:
http://www.masoncomputing.com/np249/
God Bless America, Bill 0|||||||0
mailto:LWHughes3rd (AT) aol (DOT) com


mcarrari (AT) roadrunner (DOT) com> wrote in message
news:1176591535.346414.234340 (AT) q75g2000hsh (DOT) googlegroups.com...
I am trying to purchase a 4 wheel drive 1988 Grand Wagoneer but I
don't know how to engage the 4 wheel drive high and low and the owner
doesn't know either. It is obviously very important to know if the 4
wheel drive works. Any help you guys can provide would be welcome. Are
there any particular weak points that I should know about and look for
prior to purchase expecially if it was abused. I know these are pretty
basic questions but have pity on me.




--
Posted via a free Usenet account from http://www.teranews.com




Reply With Quote
  #6  
Old   
Earle Horton
 
Posts: n/a

Default Re: How do I engage 4 wheel drive in a 1988 Wagoneer - 04-14-2007 , 07:21 PM



Heh, if you're confused now how are you supposed to take care of it after
you buy it? Plenty of Suburbans and Tahoes on the used car lots. I got a
nice three quarter ton a few years ago with an Owner's Manual that shows how
to shift into and out of four wheel drive, in case I forget.

Earle

"Michael" <mcarrari (AT) roadrunner (DOT) com> wrote

Quote:
Earl,

I didn't mention, but there is a dash mounted switch for 2 wheel drive and
4
wheel drive and a floor mounted lever for low 4 and high 4. When I
switched
the dash mounted switch to 4 wheel and lifted the lever to 4 low I don't
detect any discernible difference. Am I supposed to be stopped and put the
transmission in neutral and then lift the lever for 4 low?
Boy o boy am I confused.


"Earle Horton" <gracioso (AT) usa (DOT) com> wrote in message
news:46216103$0$31823$a82e2bb9 (AT) reader (DOT) athenanews.com...
If this is Quadratrac it is a full time four wheel drive. High-low
range
was an option in that case. This is a vacuum controlled unit, that is
very
picky about having the right kind of fluid put in it. If you don't see
a
switch or a lever it might not have low range. There may be an owner's
manual in the glove compartment, you never know.

The Full Size Jeep Association web site might have useful information
too.

http://www.ifsja.org/tech/index.html

Earle

mcarrari (AT) roadrunner (DOT) com> wrote in message
news:1176591535.346414.234340 (AT) q75g2000hsh (DOT) googlegroups.com...
I am trying to purchase a 4 wheel drive 1988 Grand Wagoneer but I
don't know how to engage the 4 wheel drive high and low and the owner
doesn't know either. It is obviously very important to know if the 4
wheel drive works. Any help you guys can provide would be welcome. Are
there any particular weak points that I should know about and look for
prior to purchase expecially if it was abused. I know these are pretty
basic questions but have pity on me.








Reply With Quote
  #7  
Old   
Herb Leong
 
Posts: n/a

Default Re: How do I engage 4 wheel drive in a 1988 Wagoneer - 04-16-2007 , 02:32 PM



In article <1176591535.346414.234340 (AT) q75g2000hsh (DOT) googlegroups.com>,
<mcarrari (AT) roadrunner (DOT) com> wrote:
#I am trying to purchase a 4 wheel drive 1988 Grand Wagoneer but I
#don't know how to engage the 4 wheel drive high and low and the owner
#doesn't know either. It is obviously very important to know if the 4
#wheel drive works. Any help you guys can provide would be welcome. Are
#there any particular weak points that I should know about and look for
#prior to purchase expecially if it was abused. I know these are pretty
#basic questions but have pity on me.
#

Are you a AAA member? AAA has auto diag clinics that run several
tests on the car to see what's wrong with it.

/herb

Reply With Quote
Reply




Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.