![]() | |
![]() |
| | Thread Tools | Search this Thread | Display Modes |
#1
| |||
| |||
|
#2
| |||
| |||
|
#3
| |||
| |||
|
|
You use the same button that you press twice to display the remaining FSS mileage. It's usually the lowest of the three buttons on the left side of the instrument cluster; on yours, probably the (R) button. You also use the ignition switch. There are four positions of the ignition key/steering lock: (0) Off (Locked) (1) Off (Unlocked) (2) On (3) Start With the doors closed, place your thumb over the (R) button on the lower edge of the instrument cluster and get ready. Here we go: Turn the key in the steering lock to Position (2). Within four seconds, press Button (R) twice. The present status for days or distance is displayed. Within 10 seconds, turn key in steering lock to Position (0). Press and hold Button (R) while turning key in steering lock to Position (2) again. The present status for days or distance is displayed once more. Continue to hold Button (R). After approximately 10 seconds, a signal sounds, and the display shows the reset mileage or distance. Release Button (R). |
|
Does anyone know how to reset the service light (Wrench) in a 2002 C Class without bringing it for dealer service. It is out of warranty and I am just changing the oil till I trade it in the spring. |
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
| |