Speedo drive

#1

sorry for posting a lot of techie problems recently, i foind the best way of
finding out is asking someone who has done the job before;

after changing the speedo cable, found out the drive must not be turning. i
have removed the little screw and the plate on top - how do i remove the
whole drive as it seems still tight. i cannot see any more screws etc.

cheers
RS

#2

It Just pulls straight out once the plate is removed,
very technically "jiggle"it round and it will slide out
Fitzy

"RS" <l400ras (AT) hotmail (DOT) com> wrote

Quote:

sorry for posting a lot of techie problems recently, i foind the best way
of finding out is asking someone who has done the job before;

after changing the speedo cable, found out the drive must not be turning.
i have removed the little screw and the plate on top - how do i remove the
whole drive as it seems still tight. i cannot see any more screws etc.

cheers
RS

#3

Thanks fitzy, the little bugger's out now, soon to be refitted with the
cable attached.

RS

#4

"RS" <l400ras (AT) hotmail (DOT) com> wrote

Quote:

sorry for posting a lot of techie problems recently, i foind the best way
of finding out is asking someone who has done the job before;

after changing the speedo cable, found out the drive must not be turning.
i have removed the little screw and the plate on top - how do i remove the
whole drive as it seems still tight. i cannot see any more screws etc.

cheers
RS

it Just pulls out, jiggle it round a bit and pull it,

Fitzy

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Speedo drive

Mini Discussion of English Mini automobiles (alt.autos.mini)

Speedo drive - 03-29-2006 , 05:41 AM

Re: Speedo drive - 03-29-2006 , 11:09 AM

Re: Speedo drive - 03-30-2006 , 03:08 PM

Re: Speedo drive - 04-06-2006 , 12:07 PM