AutosTalk Forums  

Nissan 4x4 transmission problem

Nissan Automobiles Nissan Automobiles Discussions (alt.autos.nissan)


Discuss Nissan 4x4 transmission problem in the Nissan Automobiles forum.



Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old   
petegw42@gmail.com
 
Posts: n/a

Default Nissan 4x4 transmission problem - 02-02-2007 , 02:59 PM






I have a 1990 Nissan 4x4, 4 cyl, 5 speed manual. It makes a
conspicuous metallic rattling noise in all gears, but especially first
and second. Meanwhile, 5th gear is out. I can put the stick into the
right position and it does not pop out, but it remains in neutral. No
extra noise when this is done. Also, getting it into reverse is a
little tricky but once done, it works fine.

4x4 works fine in both high and low, truck is well maintained and
clean and relatively low (140,000) miles, basically everything seems
fine other than the tranny problem. And it drives just fine in first
through 4th, no apparent problems (although it would not surprise me
if I am grinding the rest of the tranny into dust.)

A guy whom I don't trust at all thinks it is a clutch bearing, but I
have my doubts.

I have not pulled the plug to look for pieces of metal but I plan to
soon.

So the way I see it here are my options:

- fix the clutch throwout bearing and hope against hope that it solves
the noise (probably wouldn't get 5th gear back, though);

- get a used tranny from a junkyard, and either install it myself
(amateur) or find someone with more skills than me who's willing to do
it;

- get a rebuilt tranny, with same two sub-options;

- buy a brand new tranny from Nissan, if available;

- change the fluid and pray that the pieces of metal get flushed out
and I am left with a vehicle with good working 1st through 4th and
reverse;

- do nothing, keep driving it until the transmission is totally
destroyed, and re-up my AAA membership so I can get a free tow when I
break down.

I'm looking for input on the merits of all of these options and
estimates as to cost.


Reply With Quote
  #2  
Old   
Speedy Pete
 
Posts: n/a

Default Re: Nissan 4x4 transmission problem - 02-02-2007 , 10:55 PM






This sounds like a joke...! Your tranny is wasted! Get another one.

-SP



petegw42 (AT) gmail (DOT) com wrote:
Quote:
I have a 1990 Nissan 4x4, 4 cyl, 5 speed manual. It makes a
conspicuous metallic rattling noise in all gears, but especially first
and second. Meanwhile, 5th gear is out. I can put the stick into the
right position and it does not pop out, but it remains in neutral. No
extra noise when this is done. Also, getting it into reverse is a
little tricky but once done, it works fine.

4x4 works fine in both high and low, truck is well maintained and
clean and relatively low (140,000) miles, basically everything seems
fine other than the tranny problem. And it drives just fine in first
through 4th, no apparent problems (although it would not surprise me
if I am grinding the rest of the tranny into dust.)

A guy whom I don't trust at all thinks it is a clutch bearing, but I
have my doubts.

I have not pulled the plug to look for pieces of metal but I plan to
soon.

So the way I see it here are my options:

- fix the clutch throwout bearing and hope against hope that it solves
the noise (probably wouldn't get 5th gear back, though);

- get a used tranny from a junkyard, and either install it myself
(amateur) or find someone with more skills than me who's willing to do
it;

- get a rebuilt tranny, with same two sub-options;

- buy a brand new tranny from Nissan, if available;

- change the fluid and pray that the pieces of metal get flushed out
and I am left with a vehicle with good working 1st through 4th and
reverse;

- do nothing, keep driving it until the transmission is totally
destroyed, and re-up my AAA membership so I can get a free tow when I
break down.

I'm looking for input on the merits of all of these options and
estimates as to cost.


Reply With Quote
  #3  
Old   
fgrprez@ptd.net
 
Posts: n/a

Default Re: Nissan 4x4 transmission problem - 02-07-2007 , 12:29 AM



On Feb 2, 7:55 pm, Speedy Pete <speedythetrash.p... (AT) verizon (DOT) net>
wrote:
Quote:
This sounds like a joke...! Your tranny is wasted! Get another one.

-SP



peteg... (AT) gmail (DOT) com wrote:
I have a 1990 Nissan 4x4, 4 cyl, 5 speed manual. It makes a
conspicuous metallic rattling noise in all gears, but especially first
and second. Meanwhile, 5th gear is out. I can put the stick into the
right position and it does not pop out, but it remains in neutral. No
extra noise when this is done. Also, getting it into reverse is a
little tricky but once done, it works fine.

4x4 works fine in both high and low, truck is well maintained and
clean and relatively low (140,000) miles, basically everything seems
fine other than the tranny problem. And it drives just fine in first
through 4th, no apparent problems (although it would not surprise me
if I am grinding the rest of the tranny into dust.)

A guy whom I don't trust at all thinks it is a clutch bearing, but I
have my doubts.

I have not pulled the plug to look for pieces of metal but I plan to
soon.

So the way I see it here are my options:

- fix the clutch throwout bearing and hope against hope that it solves
the noise (probably wouldn't get 5th gear back, though);

- get a used tranny from a junkyard, and either install it myself
(amateur) or find someone with more skills than me who's willing to do
it;

- get a rebuilt tranny, with same two sub-options;

- buy a brand new tranny from Nissan, if available;

- change the fluid and pray that the pieces of metal get flushed out
and I am left with a vehicle with good working 1st through 4th and
reverse;

- do nothing, keep driving it until the transmission is totally
destroyed, and re-up my AAA membership so I can get a free tow when I
break down.

I'm looking for input on the merits of all of these options and
estimates as to cost.- Hide quoted text -

- Show quoted text -
I have a 91 4x4 that has tranny nightmares....i got a reman tranny for
$800 and that lasted 2 years....then i got a junk yard one for 100
bucks and that lasted 5 months....now i need to find another!

My tranny lost everything but 4th gear while i was on the turnpike
driving at 65mph. It just acted like it fell out of 5th. Not a noise
bang crack or anything. I can start the truck and put it into any gear
but 4th with out touching the clutch.

Anyone know what could have happened? I know the tranny is shot,but
what happened and why is what i'd like to know.

Any reputable places out there to get a reman or get this one rebuilt?

Thanks for any help you could give!

prez



Reply With Quote
Reply




Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.