AutosTalk Forums  

Nissan Micra fan belt adjustment

Nissan Automobiles Nissan Automobiles Discussions (alt.autos.nissan)


Discuss Nissan Micra fan belt adjustment in the Nissan Automobiles forum.



Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old   
Administrator
 
Posts: n/a

Default Nissan Micra fan belt adjustment - 05-14-2005 , 04:14 AM






My daughter has the above and recently had a fan belt replaced when her
car was serviced. 2 months later there is a squeal from the belt and I
think it needs adjusting (tightening).

I opened the bonnet but cannot see where to adjust it. There are 2 belts
- one seems tight enough but the other a little loose.

The loose belt turns the alternator (generator?) on the top, right when
looking at the engine from the driver's side of the car (that is, the
right side in Australia).

Can anyone help me?

Vaughan

Reply With Quote
  #2  
Old   
Sly
 
Posts: n/a

Default Re: Nissan Micra fan belt adjustment - 05-14-2005 , 09:26 AM






adjust the alternator, thus tightening the belt

"Administrator" <hellovalot (AT) hotmail (DOT) com> wrote

Quote:
My daughter has the above and recently had a fan belt replaced when her
car was serviced. 2 months later there is a squeal from the belt and I
think it needs adjusting (tightening).

I opened the bonnet but cannot see where to adjust it. There are 2 belts
- one seems tight enough but the other a little loose.

The loose belt turns the alternator (generator?) on the top, right when
looking at the engine from the driver's side of the car (that is, the
right side in Australia).

Can anyone help me?

Vaughan



Reply With Quote
  #3  
Old   
Administrator
 
Posts: n/a

Default Re: Nissan Micra fan belt adjustment - 05-15-2005 , 01:33 AM



In article <e0nhe.80702$WI3.31763@attbi_s71>,
"Sly" <askme (AT) myserver (DOT) com> wrote:

That's exactly what II thought I should do but there are 2 bolts that
fix the alternator to a bracket with no slot (slider) for adjustment.

You have confirmed that that is the way so I'll have another look today.

Vaughan


Quote:
adjust the alternator, thus tightening the belt

"Administrator" <hellovalot (AT) hotmail (DOT) com> wrote in message
news:hellovalot-C06084.16134814052005 (AT) news-server (DOT) bigpond.net.au...
My daughter has the above and recently had a fan belt replaced when her
car was serviced. 2 months later there is a squeal from the belt and I
think it needs adjusting (tightening).

I opened the bonnet but cannot see where to adjust it. There are 2 belts
- one seems tight enough but the other a little loose.

The loose belt turns the alternator (generator?) on the top, right when
looking at the engine from the driver's side of the car (that is, the
right side in Australia).

Can anyone help me?

Vaughan

Reply With Quote
  #4  
Old   
Sly
 
Posts: n/a

Default Re: Nissan Micra fan belt adjustment - 05-15-2005 , 07:45 AM



there is no slot, loosen the upper bolt a bit and the bottom bolt if i
remember right screws through an adjuster, kind like a square nut that
slides inside a bracket, if ya see it, yul know what i mean. tighten or
loosen that bolt and in turn yul adjust the alternator
if all else fails, loosen the bolts and look for anything that makesthe
alternator move.


"Administrator" <hellovalot (AT) hotmail (DOT) com> wrote

Quote:
In article <e0nhe.80702$WI3.31763@attbi_s71>,
"Sly" <askme (AT) myserver (DOT) com> wrote:

That's exactly what II thought I should do but there are 2 bolts that
fix the alternator to a bracket with no slot (slider) for adjustment.

You have confirmed that that is the way so I'll have another look today.

Vaughan


adjust the alternator, thus tightening the belt

"Administrator" <hellovalot (AT) hotmail (DOT) com> wrote in message
news:hellovalot-C06084.16134814052005 (AT) news-server (DOT) bigpond.net.au...
My daughter has the above and recently had a fan belt replaced when
her
car was serviced. 2 months later there is a squeal from the belt and I
think it needs adjusting (tightening).

I opened the bonnet but cannot see where to adjust it. There are 2
belts
- one seems tight enough but the other a little loose.

The loose belt turns the alternator (generator?) on the top, right
when
looking at the engine from the driver's side of the car (that is, the
right side in Australia).

Can anyone help me?

Vaughan



Reply With Quote
  #5  
Old   
Administrator
 
Posts: n/a

Default Re: Nissan Micra fan belt adjustment - 05-15-2005 , 08:15 AM



In article <XDGhe.82507$c24.46413@attbi_s72>,
"Sly" <askme (AT) myserver (DOT) com> wrote:

Quote:
there is no slot, loosen the upper bolt a bit and the bottom bolt if i
remember right screws through an adjuster, kind like a square nut that
slides inside a bracket, if ya see it, yul know what i mean. tighten or
loosen that bolt and in turn yul adjust the alternator
if all else fails, loosen the bolts and look for anything that makesthe
alternator move.


"Administrator" <hellovalot (AT) hotmail (DOT) com> wrote in message
news:hellovalot-CDB7BC.13322715052005 (AT) news-server (DOT) bigpond.net.au...
In article <e0nhe.80702$WI3.31763@attbi_s71>,
"Sly" <askme (AT) myserver (DOT) com> wrote:

That's exactly what II thought I should do but there are 2 bolts that
fix the alternator to a bracket with no slot (slider) for adjustment.

You have confirmed that that is the way so I'll have another look today.

Vaughan


adjust the alternator, thus tightening the belt

"Administrator" <hellovalot (AT) hotmail (DOT) com> wrote in message
news:hellovalot-C06084.16134814052005 (AT) news-server (DOT) bigpond.net.au...
My daughter has the above and recently had a fan belt replaced when
her
car was serviced. 2 months later there is a squeal from the belt and I
think it needs adjusting (tightening).

I opened the bonnet but cannot see where to adjust it. There are 2
belts
- one seems tight enough but the other a little loose.

The loose belt turns the alternator (generator?) on the top, right
when
looking at the engine from the driver's side of the car (that is, the
right side in Australia).

Can anyone help me?

Vaughan
Yup, that's fixed it. It's just a little different to the last time I
did anything like that - I'm not mechanically inclined much.

Thanks heaps for your response.

Vaughan


Reply With Quote
Reply




Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.