I know it's stupid but I can't work it out. The book just says "remove
the two screws" accompanied by a diagram of the underneath of the car
with the wheelarch mudshield removed. The only two screws I can see
nearby are hidden behind a shutter in the grill, and are carefully
placed with the heads backwards. As if the light was installed before
the bumper was fitted.

Help!

Andy.

"Andy Champ" <no.way (AT) nospam (DOT) com> wrote

It depends if your Primera is pre-96, if it is post 96 remove the single
screw in the surround remove that then you will see the 2 screws that hold
the lamp in the bumper, on pre-96 there are two screws in the surround that
have to be removed (but not the one you can see through the surround as this
is the adjuster screw) and two screws behind that to hold the lamp in its
mounting box.

Trevor Smith

Trevor Smith wrote:
lamp - there's a groove in the bumper. Is that the one? Whereabouts is
the screw you mean?

Tbanks

Andy