I've had my pontiac for a few years and i finally need to replace a lamp
bulb(i have high beam on one lamp but no low).I went and bought a
replacement but i seem to be having problems getting at the old bulb to
change it.Yes i do have the manual but it seems to be kinda confusing.Its
says to remove the splash shield first then undo the clips around the light
but i can't seem to get at them after taking off the shield..can anyone
help?

--
Dark-paws

In news:0OCdnWS8pcHSGwTcRVn-sA (AT) rogers (DOT) com,
darkpaws <darkpaws4life (AT) rogers (DOT) com> rambled:
There should be a pin that holds each lamp unit in place. You have to pull
this up. This will allow you to pull the whole unit forward so you can get
at the bulbs.

--

KB

Briscobar AT gmail DOT com