I have a '95 Pontiac Trans Sport. The driver's side window will move
maybe 1/4 of an inch up or down, then it will stop, and not move any
further. If I remove the rivets for the motor, and remove the motor,
will the window move freely up and down?

"TravisS155" <TravisS155 (AT) intracom (DOT) net> wrote

If you are sure it's the motor, go to the junk yard and get a good one, and
swap it out.

80 Knight schrieb:
One year ago, i swaped the power window motor on my 83' Camaro.
One person have to hold the heavy window and the other remove the
motor. Don't know if it is easier on a Trans Sport.

"TravisS155" <TravisS155 (AT) intracom (DOT) net> wrote

The window must be supported before removing the motor. It hurts the hands
as it drops down the rails.

Bill

On Wed, 25 Apr 2007 06:53:37 -0400, "Berkshire Bill"
<bkitterm (AT) berkshire (DOT) rr.com> wrote:


Ok, if I've got the window supported, and I remove the rivets holding
the motor, what is going to actually come off the door? Are the
rivets only holding the motor itself, or is it holding the part of the
window assembly, too? What I'm afraid of happening is getting that
motor loose, then half a dozen parts fall loose in the process,
leaving me with no clue how to get them back together (considering
that I can't exactly stick my head in there and see what I'm doing).

"TravisS155" <TravisS155 (AT) intracom (DOT) net> wrote

The motor only has the worm gear on it, the regulator has the other gears.
Look closely at the lift arms, it sounds like there is a roller missing or
something is binding.

Bill