![]() | |
![]() |
| | Thread Tools | Search this Thread | Display Modes |
#11
| |||
| |||
|
|
Oscar_Lives wrote: Can anyone tell me how to modify my '07 Outback so that the foglights stay on with the high beams? Don't know the answer, but to see in foggy weather, you don't want the high beams on, because when they are, the reflection back off the water droplets is worse than when the light beams are at a lower level. So why do you want to do this? |
#12
| |||
| |||
|
|
Can anyone tell me how to modify my '07 Outback so that the foglights stay on with the high beams? I suspect that your car will no longer pass inspection if you do this - |
#13
| |||
| |||
|
|
.... Years ago, I added a set of after market fog lights to a car and had problems because they were not interconnected with the high beams properly had to remove them to pass inspection. |
#14
| |||
| |||
|
|
Ja <jte1951 (AT) hotmail (DOT) com> wrote: The electrical draw of the fog lights and high beams will exceed the rated amperage capacity of the lighting circuit. Such a mod would require beefing up wiring sizes and fuses, in addition to reworking the switching. I've found that here in upstate NY, where we're overrun with whitetail deer that pose a constant threat to motorists, the foglights project a short wide beam that illuminates the sides of the road better than high or low beams alone, enabling a split second more reaction time to avoid the deer or other critters that linger along the side of the road just before they jump out in front of you...not really what the fog lites were designed for, but it helps. That's the only reason I've run with them on during conditions of normal visibility. Exactly. I've often wanted this too -- not for fog at all (I try to just *stay home* if it's foggy), but just for improved illumination of the universe when driving on dark narrow forest roads and watching out for dark narrow forest creatures. More seeing is good. I actually wouldn't mind one of those crazy racks of rally lights on the roof... |
#15
| |||
| |||
|
|
"Uncle Ben" <ben (AT) greenba (DOT) com> writes: Oscar_Lives wrote: Can anyone tell me how to modify my '07 Outback so that the foglights stay on with the high beams? Don't know the answer, but to see in foggy weather, you don't want the high beams on, because when they are, the reflection back off the water droplets is worse than when the light beams are at a lower level. (snip) Annoyingly, with proper fog lights, you don't even want the regular headlamps on either, but many American car designs and jurisdictions seem to disallow that. (Many seem to be white instead of yellow, too.) Frankly, I get the impression that they're there for reasons other than actually performing well in fog. Here in Ohio we're full of idiots who like to drive around in regular visibility with their fog lights on. ): -- Mark |
#16
| |||
| |||
|
|
I call them Deer Lights. I need to use the fog lights to provide enough light to see deer on the side of the road. Not real useful in fog, as it turns out. |
#17
| |||
| |||
|
|
Owlyn <ugot2be (AT) kidding (DOT) com> writes: (snip) I call them Deer Lights. I need to use the fog lights to provide enough light to see deer on the side of the road. Not real useful in fog, as it turns out. Mmmmm, I can see that use on deserted rural routes or whatever. It's more on the freeway in rush-hour traffic it annoys me. (-: -- Mark |
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
| |