OBD II compliance on '95 Legacy standard transmission

#11

OK. I just got off the phone with our local Subaru dealership. I was
told to disregard all information that states that that the standard
model of the '95 legacy is not compliant. I was told that it makes no
sense that their would be a difference between the two transmission
types, and that if it has an OBD II connector then it's OBD II.

So, that's what I was hoping to confirm. Thanks for all the help!

John

#12

On Apr 24, 5:48 am, Ralph E Lindberg <n... (AT) callsign (DOT) net> wrote:

Quote:

In article <1177340955.904100.312... (AT) n76g2000hsh (DOT) googlegroups.com>,

johnhayw... (AT) gmail (DOT) com wrote:
Hi,

Can anyone with a standard transmission '95 Subaru Legacy tell me if
it will work with OBD II code readers? I've heard mixed reports, but
one authoritative source indicates that only the automatic
transmission models of that year are "fully" OBD II compliant. Could
this mean there is partial OBD II compliance with the standard
transmission version?

There is a 16 pin connector to the lower left of my steering wheel
(LHS drive). The Haynes manual says that '95 Legacys do have OBD II,
and it doesn't indicate that it is dependant of transmission type.

Thanks,
John

Mine does, but I have talked to 95 manual owners that are not.

--
--------------------------------------------------------
Personal e-mail is the n7bsn but at amsat.org
This posting address is a spam-trap and seldom read
RV and Camping FAQ can be found athttp://www.ralphandellen.us/rv- Hide quoted text -

- Show quoted text -

OK. I just got off the phone with our local Subaru dealership. I was
told to disregard all information that states that that the standard
model of the '95 legacy is not compliant. I was told that it makes no
sense that their would be a difference between the two transmission
types, and that if it has an OBD II connector then it's OBD II.

So, that's what I was hoping to confirm. Thanks for all the help!

John

#13

On Mon, 23 Apr 2007 08:09:15 -0700, johnhayward wrote:

I don't think OBDII was required in 95. Or maybe it was not required on
trucks in 1995. I had a chevy that had OBDI. What a wreck that was...

#14

I got my own obd2 reader today (CANOBD 3100a). Works fine with the 95
2wd standard transmission Legacy : )

I got P0325 (knock sensor) code. Lots of info' on the web about
possible fixes.

John

#15

According to "current" rules. you should be able to look on the emmissions control cert sticker on the inside of your
hood and it will state that the vehicle is OBD II complient or not.
Rand E

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

OBD II compliance on '95 Legacy standard transmission

Subaru Subaru vehicles (alt.autos.subaru)

Re: OBD II compliance on '95 Legacy standard transmission - 04-24-2007 , 02:21 PM

Re: OBD II compliance on '95 Legacy standard transmission - 04-24-2007 , 02:39 PM

Re: OBD II compliance on '95 Legacy standard transmission - 04-26-2007 , 09:33 AM

Re: OBD II compliance on '95 Legacy standard transmission - 05-06-2007 , 12:38 AM

Re: OBD II compliance on '95 Legacy standard transmission - 05-20-2007 , 06:50 PM