![]() | |
![]() |
| | Thread Tools | Search this Thread | Display Modes |
#21
| |||
| |||
|
|
The manual that comes with the pressure guage may have an illustratiron. Your Bentley or your Bosch Fuel Injection handbook by Probst will have some illustrations. The Bentley will have actually values. Both books have troubleshooting procedures. |
|
Randolph <trash (AT) junkmail (DOT) com> wrote: Rex B wrote: I could not figure out a way to check the pressure. Where can I attach a gauge? I have not done this, but one place to do it would be in line with the supply line to the pressure regulator, using some sort of adapter. If the blockage is in the fuel pressure regulator, the pressure you measure should be the max. the pump can supply, i.e. higher than normal operating pressure. Random thoughts on my part, no factual knowledge claimed. Jim B. |
#22
| |||
| |||
|
#23
| |||
| |||
|
|
Can you elaborate a bit on the coolant temp sensor? |
#24
| |||
| |||
|
|
Rex B wrote: Can you elaborate a bit on the coolant temp sensor? It's all in the Bentley. If you have it, read it. If you don't have it, buy it. |
#25
| |||
| |||
|
|
Got the Bentley Ran out of patience and time. Jetta is in the trailer, soon to be deposited at the shop. Thanks for all the help. I'll post results if anyone is interested. |
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
| |