The window in my wife's V70 is stuck in the down position. When I
toggle the switch, I do not hear anything when I try to raise it, but
when I push down, I hear a "click" after a few seconds ... however, I
cannot detect movement in the door.

I've read elsewhere about using electronic cleaner to clean the
contacts to see if that works, but wanted to ask if there is anything
else to try while I begin to disassemble things or if there is a
"usually, it is this, try it first" type of a tip.

I've read about other models and taking out the center console, but
these switches are on the door. I see a little plastic panel that I
figure hides a screw or torx. Is that enough to get to the switch, or
do I need to remove the panel?

TIA.
Dave

I was able to get the master switch out of the door and cleaned the
contacts. It worked for a day, but now it is flaky again so I believe
that I need a new switch.

My part number(s) is:
LH 94 72 276
03 4585 15

I've seen a number of replacement parts online, but am curious about
what the numbers represent. For example, on eBay, I found a master
switch with the part number 86 38 452, and the bottom number is 03
4585 45.

Another had the same numbers.

Are there certain numbers that are relevant and others that pertain to
things like color, etc.?

TIA.
Dave

On Mar 15, 5:50 pm, "Brian Sørup" <camaropower... (AT) hotmail (DOT) com> wrote:
Thank you.