![]() | |
![]() |
| | Thread Tools | Display Modes |
#1
| |||
| |||
|
#2
| |||
| |||
|
|
Howdy! My ´85 240 with the AW70 automatic transmission might need an external oil cooler. I've heard that the one that's originally mounted on some 740's, fits the 240. Does anyone have more information on this, part#, pictures, guides...anything? There is virtually nothing about this on google.com. |
#3
| |||
| |||
|
|
Why do you think you need one? Do you do a lot of towing, do you have overheating problems, or is it just time for a new radiator? |
|
I've got an external oil cooler on my 740. I don't particularly need one, but the internal one apparently developed a leak (in fact it was a false alarm) and I happened to have one lying around. It's just an aftermarket oil cooler bought from an accessory shop, about 5 inches x 9 inches. It's connected by a couple of rubber hoses and screw cliped to the oil lines, and mounted in front of the radiator with zip-ties. I guess this is way over-specified, because the one in the radiator is only a small cylinder about 1.5 inches in dia. and 6 inches long. |
|
Someone on here mentioned that it might lead to over-cooling in the winter, but so far I haven't noticed any problems. But maybe your Danish winters are colder than our British ones. |
#4
| |||
| |||
|
|
snip Why do you think you need one? I guess this is way over-specified, because the one in the radiator is only a small cylinder about 1.5 inches in dia. and 6 inches long. The difference in cooling apacity may be hard to judge based on |
#5
| |||
| |||
|
|
snip Why do you think you need one? I guess this is way over-specified, because the one in the radiator is only a small cylinder about 1.5 inches in dia. and 6 inches long. The difference in cooling apacity may be hard to judge based on physiscal size. Air cooling stuff requires about 100 X more air flow than cooling water flow, and much bigger surface areas too. |
![]() |
| Thread Tools | |
| Display Modes | |
| |