AutosTalk Forums  

Hood hinges for 240s

Volvo automobiles Volvo automobiles. (alt.autos.volvo)


Discuss Hood hinges for 240s in the Volvo automobiles forum.



Reply
 
Thread Tools Display Modes
  #1  
Old   
Tim McNamara
 
Posts: n/a

Default Hood hinges for 240s - 01-04-2009 , 12:33 PM






I discovered that my 1990 240 has a bent driver's side hood hinge,
causing the hood to be lifted up almost 1/2" and allowing rain and snow
to affect the electronics.

The "local" Volvo junkyard (about 50 miles away) has a variety of hinges
from 1983-1993 but none from 1990. Are these pretty much all the same
across the various years of 240s?

Thanks!

Reply With Quote
  #2  
Old   
James Sweet
 
Posts: n/a

Default Re: Hood hinges for 240s - 01-04-2009 , 01:32 PM






Tim McNamara wrote:
Quote:
I discovered that my 1990 240 has a bent driver's side hood hinge,
causing the hood to be lifted up almost 1/2" and allowing rain and snow
to affect the electronics.

The "local" Volvo junkyard (about 50 miles away) has a variety of hinges
from 1983-1993 but none from 1990. Are these pretty much all the same
across the various years of 240s?

Thanks!

The hinges are identical from 1975-1993, chances are you can even find
one the same color. Keep them clean and lubricated to prevent the bending.


Reply With Quote
  #3  
Old   
Tim McNamara
 
Posts: n/a

Default Re: Hood hinges for 240s - 01-04-2009 , 03:08 PM



In article <gjqvb9$v6a$1 (AT) news (DOT) motzarella.org>,
James Sweet <jamessweet1 (AT) trashmail (DOT) net> wrote:

Quote:
Tim McNamara wrote:
I discovered that my 1990 240 has a bent driver's side hood hinge,
causing the hood to be lifted up almost 1/2" and allowing rain and
snow to affect the electronics.

The "local" Volvo junkyard (about 50 miles away) has a variety of
hinges from 1983-1993 but none from 1990. Are these pretty much
all the same across the various years of 240s?

Thanks!


The hinges are identical from 1975-1993, chances are you can even
find one the same color. Keep them clean and lubricated to prevent
the bending.
Thanks, James. I wondered what caused the bending; that side of the
hood had always been up just a bit (less than 1/4") but recently noted
that it was much more so.


Reply With Quote
Reply




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Powered by vBulletin
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.